Go Back   US MUSCLE US Muscle Forum General Discussion
User Name

Thread Tools Search this Thread Display Modes
Old 30-04-2018, 05:52 PM
Shan Shan is offline
Join Date: Apr 2017
Location: VIC
Posts: 62
4link install....need to find someone to install Eastern/SE Suburbs VIC

Hi guys,

As per some of my other posts, I am currently looking to install Ridetech 4-link suspension on the rear of my 1968 Camaro.

I had one guy all sorted for the work, but he is suddenly no longer in business, so I now need to go through the whole process again.

There is a small amount of welding required - essentially 4x pre-cut brackets need to be welded to the diff via a supplied jig. Otherwise the kit is a bolt-on job.

Can anyone suggest a shop or suitably qualified person that does this sort of work and can install this for me?

Any suggestions appreciated.

Reply With Quote

Find this Ad annoying? Want it removed? Then register now!.. It's FREE! Click HERE.
Old 30-04-2018, 06:37 PM
67camaro454's Avatar
67camaro454 67camaro454 is offline
Senior Member
Join Date: Jun 2009
Location: geelong
Posts: 160
4 link

I installed a air ride 4 link in my 68 not that hard. I used nutserts to secure the cradle to the chassis. I also fitted crush tubes in the chassis where the cradle bolts went through chassis.
Reply With Quote
Old 01-05-2018, 02:21 AM
Angry's Avatar
Angry Angry is offline
Senior Member
Join Date: Jul 2013
Location: Riverina NSW
Posts: 1,171
Name: Alan
Check with your engineer how they want the cradle attached to the car,..the tags that weld t the diff arent real hard,...especially if someones got a TIG welder.

Id even do it at home n tack the brackets then pull the diff out n take it to a welder who does race cars, theyre pretty versed in welding brackets to diffs

1969 Camaro Z28 TUF69Z
1964 F100 SWB 64 EFFY

Reply With Quote
Old 01-05-2018, 01:14 PM
Shan Shan is offline
Join Date: Apr 2017
Location: VIC
Posts: 62
Yeah - I know it is not a difficult install as far as things go.

I'll be candid - I do not have the facilities to get it done and added to that I am a little time poor as well.

Remove leaf suspension, drop diff, weld tabs with jig, measure/drill rails and bolt the kit together....

Not that complex, BUT I am on my own - no helpers - and I do not have a hoist. My back isn't top-notch, so I am not crawling around under my car for long periods trying to pull a diff around.

If I stuff my back again - wife will shoot me. Got two kids under 4, and a hubby who can't bend over to pickup a toddler ain't much help.

Happy wife, happy life.

Off I go to the man with the hoist and tig welder.

Suggestions for good place still appreciated. : )
Reply With Quote
Old 01-05-2018, 02:52 PM
Benny's Avatar
Benny Benny is offline
Senior Member
Join Date: Jul 2010
Location: Melbourne
Posts: 198
Name: Ben
Could try All Race Fabrication in Hallam, they can do this work easy, Engineering will be your issue.
Reply With Quote
Old 03-05-2018, 01:13 PM
Shan Shan is offline
Join Date: Apr 2017
Location: VIC
Posts: 62
Hi Benny,

Thanks for that. I have been in conversations with guy in Croydon over the last couple of days - Darren @ Trikfab.


he is responsive, communicates well and so far he seems like a really solid guy. He is a little closer to me (Ringwood), so will give him a go.

Very grateful for the recommendation though - will keep the Hallam mob in mind.

Engineering? Yep. I have another thread running about that - another story in itself.

Darren @ Trikfab said he was dealing with an engineer currently who seemed very reasonable. May try to get the details of this engineer and update in my other post.

Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +10. The time now is 02:35 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Ad Management plugin by RedTyger