Go Back   US MUSCLE US Muscle Forum General Discussion
User Name
Password


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-10-2008, 01:12 AM
AUSCAMARO's Avatar
AUSCAMARO AUSCAMARO is offline
Senior Member
 
Join Date: Aug 2008
Location: Perth
Posts: 3,152
Name: Mitch
Mitch's 68 Camaro. Project 'ORANGE BLOOD'

Well, I suppose I better get some details down before I start the long and loborious rebuild process of my 68...

I have been looking for one for a while now and finally found something within my budget and to my liking in QLD. It arrived last Thrusday after a month long shipping fiasco through AutoTrans. It also arrived with a broken boot spoiler and gouges in the paint from some knob jockey pushing it from the back...

The car also rocked up as a non runner due to the starter motor and ring gear being lunched by the tools continually attempting to start it after it had already begun slipping.

The AutoTrans guy I spoke to told me that "It's common on these old FORD's mate"... What a Muppet!

Any way it's now in my garage awaiting some loving.. The intention is to firstly get it to a running state and then attempt to create a plan of attack as to how and where I am going to start the rebuild.

I have new floor pans (full sections) on the way from the States now as I knew that they needed to be done and the rear strut tops also need to be repaired. The boot floor seems to be solid and I can only imagine it has it's fair share of bog hiding all manner of nasties under the paint work. The chassis also looks solid and I'm hoping there won't be much work needed in that area.

I don't have a huge budget for the car and my wife and I are forcasting a 7 year build at this stage...

What do I want to achieve with the car?

I luuuurvvvv the Pro Touring look and will more than likely go down that road. I have 18" front and 20" rear polished Coys C5 rims and they will be the basis for the look I'm after.... It also has a steel 2" cowl hood and will be bumperless.

Anyways, here are some pics of what I am starting with...





















Mitch

Last edited by AUSCAMARO; 02-05-2009 at 11:18 PM..
Reply With Quote


Find this Ad annoying? Want it removed? Then register now!.. It's FREE! Click HERE.
  #2  
Old 10-10-2008, 07:36 AM
454 NUTTR's Avatar
454 NUTTR 454 NUTTR is offline
Senior Member
 
Join Date: Jun 2008
Location: vic
Posts: 448
Name: scott
good luck with the project mitch are u keeping the drive line the same or going to up date and are u going black once more
__________________
F@#%!ING Hoon law what a joke go and catch a real criminal
Reply With Quote
  #3  
Old 10-10-2008, 08:13 AM
cluxford's Avatar
cluxford cluxford is offline
Moderator
 
Join Date: Jan 2007
Location: Melbourne
Posts: 5,036
Name: Chris
Mitch,

Great to see you on the board, nice clean 68 you have there, always a good place to start.

Kees us updated on the progress.

Chris
__________________
Light travels faster than sound. This is why some people appear bright until you hear them speak
Reply With Quote
  #4  
Old 10-10-2008, 06:17 PM
RSZ28's Avatar
RSZ28 RSZ28 is offline
Senior Member
 
Join Date: May 2007
Location: Eastside of the Land down under!
Posts: 556
Welcome aboard Mitch. Very nice 68 to start with!

Cheers!
Reply With Quote
  #5  
Old 10-10-2008, 10:02 PM
AUSCAMARO's Avatar
AUSCAMARO AUSCAMARO is offline
Senior Member
 
Join Date: Aug 2008
Location: Perth
Posts: 3,152
Name: Mitch
Quote:
Originally Posted by 454 NUTTR View Post
good luck with the project mitch are u keeping the drive line the same or going to up date and are u going black once more
No plans on paint and driveline at this point in time.

The Mrs would like to keep it black and go black leather interior though... The car was originally Red with black stripes until the last owner decided to paint it black and I must admit I prefer the original paint scheme...




The driveline will stay as is for the short term as it's the body I want to get upto scratch first and foremost.

I'm not after a powerhouse at the moment (but that may change in the future) as I have my 13b turbo 808 for ****s and giggles...



So i'll just get it to a drip less reliable driveline for now..

Mitch
Reply With Quote
  #6  
Old 12-10-2008, 11:19 AM
Nev68's Avatar
Nev68 Nev68 is offline
Senior Member
 
Join Date: Jul 2008
Location: Oz
Posts: 6,055
Quote:
Originally Posted by AUSCAMARO View Post
Well, I suppose I better get some details down before I start the long and loborious rebuild process of my 68...

I have been looking for one for a while now and finally found something within my budget and to my liking in QLD. It arrived last Thrusday after a month long shipping fiasco through AutoTrans. It also arrived with a broken boot spoiler and gouges in the paint from some knob jockey pushing it from the back...

The car also rocked up as a non runner due to the starter motor and ring gear being lunched by the tools continually attempting to start it after it had already begun slipping.

The AutoTrans guy I spoke to told me that "It's common on these old FORD's mate"... What a Muppet!

Any way it's now in my garage awaiting some loving.. The intention is to firstly get it to a running state and then attempt to create a plan of attack as to how and where I am going to start the rebuild.

I have new floor pans (full sections) on the way from the States now as I knew that they needed to be done and the rear strut tops also need to be repaired. The boot floor seems to be solid and I can only imagine it has it's fair share of bog hiding all manner of nasties under the paint work. The chassis also looks solid and I'm hoping there won't be much work needed in that area.

I don't have a huge budget for the car and my wife and I are forcasting a 7 year build at this stage...

What do I want to achieve with the car?

I luuuurvvvv the Pro Touring look and will more than likely go down that road. I have 18" front and 20" rear polished Coys C5 rims and they will be the basis for the look I'm after.... It also has a steel 2" cowl hood and will be bumperless.

Anyways, here are some pics of what I am starting with...



Mitch
Mitch,
Your car looks nice in the photos, looks like you have good starting point.
Gotta luv a tidy 1st Gen Camaro.
Not sure about the seats though

Are you doing a complete strip down and rebuild or are you doing it piece by piece so you can keep it as driver?

Rgds,
Nev
Reply With Quote
  #7  
Old 12-10-2008, 08:37 PM
AUSCAMARO's Avatar
AUSCAMARO AUSCAMARO is offline
Senior Member
 
Join Date: Aug 2008
Location: Perth
Posts: 3,152
Name: Mitch
Quote:
Originally Posted by Nev68 View Post
Mitch,
Your car looks nice in the photos, looks like you have good starting point.
Gotta luv a tidy 1st Gen Camaro.
Not sure about the seats though

Are you doing a complete strip down and rebuild or are you doing it piece by piece so you can keep it as driver?

Rgds,
Nev
Hey Nev,

I would like to keep it as a driver if I can, but I need to do the floor pans so that will obviously mean it will have to be stripped down to a fair degree.

Whats wrong with my 60's red velour pornstar seats and shag pile carpet?
Reply With Quote
  #8  
Old 13-10-2008, 10:19 AM
J.J.'s Avatar
J.J. J.J. is offline
Senior Member
 
Join Date: Apr 2008
Location: Melb
Posts: 873
Name: Josh
good luck with the resto bro, will be watching
Reply With Quote
  #9  
Old 14-10-2008, 07:53 PM
Nev68's Avatar
Nev68 Nev68 is offline
Senior Member
 
Join Date: Jul 2008
Location: Oz
Posts: 6,055
Quote:
Originally Posted by AUSCAMARO View Post
Hey Nev,

I would like to keep it as a driver if I can, but I need to do the floor pans so that will obviously mean it will have to be stripped down to a fair degree.

Whats wrong with my 60's red velour pornstar seats and shag pile carpet?
Hey Mitch,
You can do the big jobs over winter and keep driving through the nice weather.
It's bloody frustrating having a nice car in the shed and not being able to drive it.
Give me black vinyl (it's good for seats too )

Rgds,
Nev
Reply With Quote
  #10  
Old 16-10-2008, 12:17 AM
AUSCAMARO's Avatar
AUSCAMARO AUSCAMARO is offline
Senior Member
 
Join Date: Aug 2008
Location: Perth
Posts: 3,152
Name: Mitch
Quote:
Originally Posted by Nev68 View Post
Give me black vinyl (it's good for seats too )
Rgds,
Nev
Ha ha, nice one

Replaced the starter pinion gear yesterday and shimmed the starter motor so it can mesh with the ring gear properly.

Cranked it over and whalla. She's a goer now!

Couple of quick vids for ya's...

My wife playing in the Camaro
http://au.youtube.com/watch?v=aTXe_BBKIak

Taking my son for his first spin in the 68.
http://au.youtube.com/watch?v=Rz8Et9GCaIA

Cheers

Mitch

Bye the way, I went to Chev Power in Maddington today and they ha two 68's out the back. One fully resto'd over the last 11years and the other just arrived from the US with a big block in it.

Last edited by AUSCAMARO; 16-10-2008 at 12:19 AM..
Reply With Quote
  #11  
Old 16-10-2008, 01:18 AM
Downesy's Avatar
Downesy Downesy is offline
Senior Member
 
Join Date: Oct 2008
Location: Perth WA
Posts: 130
Car looks great mitch , does chev power have those cars advertised some were with pics ?



Quote:
Originally Posted by AUSCAMARO View Post
Ha ha, nice one

Replaced the starter pinion gear yesterday and shimmed the starter motor so it can mesh with the ring gear properly.

Cranked it over and whalla. She's a goer now!

Couple of quick vids for ya's...

My wife playing in the Camaro
http://au.youtube.com/watch?v=aTXe_BBKIak

Taking my son for his first spin in the 68.
http://au.youtube.com/watch?v=Rz8Et9GCaIA

Cheers

Mitch

Bye the way, I went to Chev Power in Maddington today and they ha two 68's out the back. One fully resto'd over the last 11years and the other just arrived from the US with a big block in it.
Reply With Quote
  #12  
Old 16-10-2008, 01:44 AM
AUSCAMARO's Avatar
AUSCAMARO AUSCAMARO is offline
Senior Member
 
Join Date: Aug 2008
Location: Perth
Posts: 3,152
Name: Mitch
Quote:
Originally Posted by Downesy View Post
Car looks great mitch , does chev power have those cars advertised some were with pics ?

Nah, they are customers cars Downesy...

Mitch
Reply With Quote
  #13  
Old 17-10-2008, 12:46 AM
AUSCAMARO's Avatar
AUSCAMARO AUSCAMARO is offline
Senior Member
 
Join Date: Aug 2008
Location: Perth
Posts: 3,152
Name: Mitch
Couple more pics of my Toyz after a bit of a tidy up....









Taking the Camaro out for a bit of a run tomorrow to see how she goes after a bit of cruising.

Mitch
Reply With Quote
  #14  
Old 17-10-2008, 11:01 AM
69camaro 69camaro is offline
Senior Member
 
Join Date: Jan 2007
Location: Melbourne
Posts: 307
Name: Gareth
Quote:
Originally Posted by AUSCAMARO View Post
Couple more pics of my Toyz after a bit of a tidy up....



Mitch
Mitch,
Looks similar to the line up in my shed which includes these :

Name:  DSC0204.JPG
Views: 1795
Size:  141.7 KB

Name:  DSC01983.JPG
Views: 1773
Size:  140.2 KB
Reply With Quote
  #15  
Old 17-10-2008, 07:27 PM
Nev68's Avatar
Nev68 Nev68 is offline
Senior Member
 
Join Date: Jul 2008
Location: Oz
Posts: 6,055
Quote:
Originally Posted by AUSCAMARO View Post
Ha ha, nice one

Replaced the starter pinion gear yesterday and shimmed the starter motor so it can mesh with the ring gear properly.

Cranked it over and whalla. She's a goer now!

Couple of quick vids for ya's...

My wife playing in the Camaro
http://au.youtube.com/watch?v=aTXe_BBKIak

Taking my son for his first spin in the 68.
http://au.youtube.com/watch?v=Rz8Et9GCaIA

Cheers

Mitch

Bye the way, I went to Chev Power in Maddington today and they ha two 68's out the back. One fully resto'd over the last 11years and the other just arrived from the US with a big block in it.
Hey Mitch,
The car looks and sound alright.
Glad to see you'v gat a "driver" now, just in time for the summer.
Onya. (Gotta get mine going!!)

Rgds,
Nev
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +10. The time now is 05:07 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Ad Management plugin by RedTyger