AAP specials for the panel guys
thought I would share some of the specials deals we have at present that will be ready for the WA hot Rod and Street machine Show
these are flexible sanding blocks ideal for block sanding, with several different shapes including round, reverse curve and 600mm + flat ones (great for roofs)
we have 3 starter kits and they are all 10% off RRP
click here to see the range
not on our website yet but in stock we have...
Sheet holders provide the quickest method for holding sheets together for drilling or riveting. Drill the size hole needed for the rivet and insert the sheet holder. The holders listed comprise the most common sizes. Material thickness range 0" - 1/4". Colour coded for easy identification. Use with Cleco holder pliers
1/8 and 3/16" in stock
Side Grip Clamps
Designed to hold two or more work pieces together where no holes exist. Clamping force is applied at edge of work. Spring loaded, pliers actuated. The lack of a take-up screw makes it impossible to over-tighten and damage the work surfaces or the clamp. Two sizes available. Use with Cleco holder pliers
Clamping capacity - 0-1/2"
Jaw depth: 1/2" and 1"
Overall Length: 2-3/16"
Inter Panel Clamps
Position flat or curved panels for precision butt welds with these innovative tools. Intergrips are miniature clamps that align panels edge to edge and surface to surface, leaving a.040" gap, for full weld penetration. Clamp the sections together, tack weld, and remove the intergrips for final welding. The result is a clean weld requiring little grinding.
I will do 10% off the clecos, cleco pliers, side grip and inter panel clamps as well.
Check our stand out at the WA Hot Rod and Street machine Show where we will have even more great deals and new products
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread Tools||Search this Thread|