US MUSCLE
|
#16
05-07-2009, 09:30 PM
|
||||
|
||||
|
No Work On The Car Today But.........
We Took The Camaro For A Drive 2hrs Sth Of Perth To A Little Place Called Quindanning Pub,nice Little Spot Down That Way.we Spotted 68 Impala,fj Ute,gtho Shaker,eh,2x Hg's And A Heap Of Bikes!!! The Car Went Really Well.got The Girl Up To 90 Mph And I Was Half Expecting A Rod To Come Flyin Out Of The Bonnet But It All Went Well Except For The Front Shocks. The Front Left Wheel Scuffs On The Guard Real Bad!!(IT MIGHT HAVE SOMETHIN TO DO WITH THE BLOKE BEHIND THE WHEEL!!!!) I'll Sort That Out Next Time Im Home From Work. A Great Day For A Drive!!! Paul 
|
|
#17
05-07-2009, 09:38 PM
|
||||
|
||||
|
Took the new laser-cut exhaust flanges to John so he can begin making the new system..
And put a floor in my temp shed for while the garage gets demolished -to make way for the new 140sqM one. Everything takes so damn long! 
|
|
#18
06-07-2009, 11:44 AM
|
||||
|
||||
|
Quote:
Mitch
__________________
"I usually downshift when I'm near a Prius so they can hear me hurting the environment"
|
|
#19
06-07-2009, 12:00 PM
|
||||
|
||||
|
I put a cardboard box on the bonnet and it had a bit of tin sticking out and put yet another scratch in it.. and i started it up for the first time in a month and a half
__________________
Cheers Jamie 68 Camaro, Long term Work in Progress
|
|
#20
06-07-2009, 12:33 PM
|
||||
|
||||
|
Quote:
Gee Gav's gunna be impressed when he see's your signature Jamie! Mitch
__________________
"I usually downshift when I'm near a Prius so they can hear me hurting the environment"
|
|
#21
06-07-2009, 12:51 PM
|
||||
|
||||
|
Quote:
__________________
Cheers Jamie 68 Camaro, Long term Work in Progress
|
|
#23
06-07-2009, 09:09 PM
|
||||
|
||||
|
Well, like I said, I made some patch panels and mig'd em in.
Don't ya just love molten steel going down your socks, or grabbing something really really hot. Makes me think that leather gloves were designed to hold the heat in long after you've chucked the offending item....
|
|
#24
06-07-2009, 09:12 PM
|
||||
|
||||
|
Quote:
|
|
#26
10-07-2009, 07:16 AM
|
||||
|
||||
|
did the same similar jamie, thought id be smart and pull the nose cone off so i could paint the engine bay properly but the front guards were that tight against it ,it took a big chunk of paint with it. Month old paint job f@#$$d, cant match paint, while ive got it apart ill start again. Dumb ass!!!!
|
|
#27
10-07-2009, 07:50 AM
|
||||
|
||||
|
New shed just got finished 8*9 4.5 mtrs tall and installed the 2 post hoist(yay no more greasy back),pulling the chassis off the body to start recoing it.
p.s. when you are unpacking the hoist and the lift arm falls out I have proven it is substantially harder than a big toe. I was of course wearing chinese safety sandals as it was a chinese made hoist.
__________________
Budgets are for treasurers not car builders, words of a man that learnt the hard way Ken
Last edited by chevguy; 10-07-2009 at 07:52 AM..
|
|
#29
10-07-2009, 02:22 PM
|
||||
|
||||
|
I walked into my shed today and sighed.. previous owners dodgied up the wiring to the shed with our house powerpoints so it overloads the system as we found out in the pouring rain grrrr!!!
Going to install a sole 3 phase unit and also pinch the old mans hoist winnar! In the meantime im doing car part shopping 
|
 |
| Currently Active Users Viewing This Thread: 4 (0 members and 4 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
