Go Back   US MUSCLE US Muscle Forum Technical Discussion
User Name
Password


Reply
 
Thread Tools Display Modes
  #16  
Old 22-08-2018, 08:16 PM
Geoff 4 Geoff 4 is offline
Senior Member
 
Join Date: Apr 2016
Location: Australia
Posts: 243
Name: Geoff
Correct Frank.
A smaller crank pulley spins the accessories slower. A smaller w/pump pulley spins the pump faster. A smaller pump pulley should be tried first for a hot runner. Some A/C cars had smaller pump pulleys because of the extra heat generated with A/C.

Another trick that I have used successfully on a few troublesome hot running engines, to get them running cooler.

Most American V8 engines have some sort of WP bypass, which serves two purposes:
- without the bypass, if the t'stat should jam in the closed position, pressure could become excessive & the usual result is a welsh plug will blow out, usually at the front of the engine; generally only happens at high rpms.
- it provides quicker warm engine warm up. The bypass is usually located under the stat & connects to a passage that feeds the inlet side of the WP. Heated coolant is diverted to the inlet side of the WP so that some pre-heated coolant enters the engine.

The downside to this pre-heating is that the engine gets fed pre-heated coolant. Not good if the engine has a tendency to run hot or overheat. Might be great for a Michigan winter, but not here....

The bypass location & design varies between engine brands & I only know some of them.

S/b Chrys & BB Chev use a short hose that runs from below stat into WP housing.

BB Chrys has the BP passage in the pump housing, directly below the t'stat.

Pontiacs have a connecting BP passage between the coolant x over below the stat & the back of the WP housing.

To improve cooling, try reducing the passage size to about 3/8". With a Pontiac, sandwich a 3/8" ID washer under the O ring.

Don't completely block the BP, you need some connection for pressure relief.
Reply With Quote


Find this Ad annoying? Want it removed? Then register now!.. It's FREE! Click HERE.
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +10. The time now is 06:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Ad Management plugin by RedTyger