kiwicamaro
17-05-2010, 06:03 PM
Hi Guys
We are new to these forums have normally posted on the Team camaro site, we did a couple of posts on various things we did on the 68, I thought it might be of interest to some of the Camaro owners on this site This is what I started with
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000313.jpg
First I Dynamat in the entire trunk
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000537.jpg
Making the brackets to mount the rod Rod Doors Panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000571.jpg
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000571.jpg
Next I lined Carpeted the side panels
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000575.jpg
Making a pattern for the floor panels from card board
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000578.jpg
Cut out panels from MDF
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000581.jpg
Carpeting the panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000585.jpg
Making the bulge to clear the wheel arch and shock mount
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000590.jpg
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000591.jpg
The bulge is carpeted
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000598.jpg
Installed panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000599.jpg
Getting closer
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000608.jpg
Cut out the bow tie for the panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000615.jpg
Last panel covered
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000617.jpg
Finally Complete
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000619.jpg
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000621-1.jpg
Hope this is of some help for those that might want to tackle this job
We are new to these forums have normally posted on the Team camaro site, we did a couple of posts on various things we did on the 68, I thought it might be of interest to some of the Camaro owners on this site This is what I started with
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000313.jpg
First I Dynamat in the entire trunk
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000537.jpg
Making the brackets to mount the rod Rod Doors Panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000571.jpg
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000571.jpg
Next I lined Carpeted the side panels
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000575.jpg
Making a pattern for the floor panels from card board
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000578.jpg
Cut out panels from MDF
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000581.jpg
Carpeting the panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000585.jpg
Making the bulge to clear the wheel arch and shock mount
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000590.jpg
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000591.jpg
The bulge is carpeted
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000598.jpg
Installed panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000599.jpg
Getting closer
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000608.jpg
Cut out the bow tie for the panel
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000615.jpg
Last panel covered
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000617.jpg
Finally Complete
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000619.jpg
http://i197.photobucket.com/albums/aa79/kiwiwoosh/P1000621-1.jpg
Hope this is of some help for those that might want to tackle this job