perth pits / seat belts

[westozmonaro]

hi guys

what are most guys doing with seat belts for the pits
do they need to be replaced ? i think yes so far
then what have you replaced them with

[blackoutsteve]

Australian approved belts are required.
If your build date is prior to Jan 1st 1969, you can install just lap belts..
However in your case, 2nd week of March 1969 ;) you need lap sash.
They don't need to be of the intertia type. I'm pretty sure that's the deal.

Buy the cheapest belt that gets it through, then swap your OEs back in.:D

[doctor4766]

Australian approved belts are required.
If your build date is prior to Jan 1st 1969, you can install just lap belts..
However in your case, 2nd week of March 1969 ;) you need lap sash.
They don't need to be of the intertia type. I'm pretty sure that's the deal.

Buy the cheapest belt that gets it through, then swap your OEs back in.:D

Or call Seatbelt Solutions on (08) 9258 3666
I've heard some good reports on them

[Twisted67]

Or call Seatbelt Solutions on (08) 9258 3666
I've heard some good reports on them

Yep ive heard the same thing Paul.

[plodge]

I used off the shelf Klippan in my roadrunner, about $120 each @ most autoparts stores

[69SS]

Or call Seatbelt Solutions on (08) 9258 3666
I've heard some good reports on them

Good job and a pretty good price,they can use the old hardware and just replace the webbing with "ADR" compliant material.. They did my Camaro and several of my bro in laws early holdens..

[Nev68]

Good job and a pretty good price,they can use the old hardware and just replace the webbing with "ADR" compliant material.. They did my Camaro and several of my bro in laws early holdens..

So this mob use the original buckles etc?

[69SS]

So this mob use the original buckles etc?

Nev Im pretty sure this is the name of the mob, ill check with my bro in law to be sure.. He got them done for me as xmas pressie..

[AUSCAMARO]

I used off the shelf Klippan in my roadrunner, about $120 each @ most autoparts stores

Same same.. Cheap and easy.

[69SS]

So this mob use the original buckles etc?

Nev, just confirmed it was Seatbelt Solutions, unit 1, 35 Collin Jamieson Dr Welshpool. WA 92583666 - I think the guys name is Colin. He works a lot with Aeronautic applications and such.

[Nev68]

Nev, just confirmed it was Seatbelt Solutions, unit 1, 35 Collin Jamieson Dr Welshpool. WA 92583666 - I think the guys name is Colin. He works a lot with Aeronautic applications and such.

Thanks.
I've sent them an email to enquire about use of original buckles etc.