Gavs 69 - a work in progress [Archive]

USA-69Z

07-07-2009, 09:26 PM

yes yes another heres 'my car thread'. Heres my little cnr of cyberspace where i can whack up a cupla pics and share my cars progress . Im at the stage where im mproving while i drive it mostly. Although a full rebuild would be nice.
Gav.
http://i221.photobucket.com/albums/dd202/dragstripper/MADday09007.jpg

after a recent trip to the US i brought back a heap of goodies to go on .

Marquez billet tail lights
http://i221.photobucket.com/albums/dd202/dragstripper/frontendbuild004.jpg

Today my rims arrived after 3 and half months of waiting.
18 x 10 and 18 x 8 3 peice KWC rims.
http://i221.photobucket.com/albums/dd202/dragstripper/frontendbuild006.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/frontendbuild005.jpg

USA-69Z

07-07-2009, 09:28 PM

Speedtech frontend went on (mostly) today . I plan on getting my car as low as possible .
http://i221.photobucket.com/albums/dd202/dragstripper/frontendbuild002.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/frontendbuild010.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/frontendbuild011.jpg

chevguy

07-07-2009, 09:31 PM

Very nice gear,starting to feel a little left out putting my stock front end back in lol.

rodent

07-07-2009, 09:45 PM

Looks nice :) I had a bit of a drama connecting my sway bar up after the install :( I had to bend the ends of the sway bar in about 1/2" ....I can't remember what but it was hitting something :(

Downesy

07-07-2009, 09:47 PM

Nice QA1's I will be messing around with my pre-load this weekend to raise my ride height.

USA-69Z

07-07-2009, 09:48 PM

funny you say that ... i did notice the swaybar end pins look awfully close to hitting on full lock on the inside of brake/stubs . geez im hoping i dont gotta get that sucker bent. Was a custom fat job that took 3 goes to get it right:(

rodent

07-07-2009, 09:51 PM

May the force be with you...........................:)

USA-69Z

07-07-2009, 09:51 PM

still waiting on my new moser rear end ,4 tires , subframe connectors , body panels. :cool:

67SS502

07-07-2009, 10:34 PM

when is that moser diff due? love to see pics of that

WILD68

07-07-2009, 10:48 PM

Nice front end Gav.. and the wheels look trick too.. i am jealous... in a good way, one day i will have some play money:p

454 NUTTR

07-07-2009, 10:56 PM

i like

camaro_1967rs

07-07-2009, 11:00 PM

very nice 69 gav, nothing like a good red and black car is there?

68cmaro

07-07-2009, 11:04 PM

Hi Gav

With all of these nice bits, what's happening with your old wheels ?

Cheers CHRIS

tonner

07-07-2009, 11:27 PM

Good to see it all coming together Gav.

USA-69Z

08-07-2009, 12:20 AM

Hi Gav

With all of these nice bits, what's happening with your old wheels ?

Cheers CHRIS

Chris , i sold the torque thrust 2s a while back to a mate. Im currently running rallys till the tires turn up

USA-69Z

08-07-2009, 12:22 AM

when is that moser diff due? love to see pics of that

i ordered the diff and other bits around 5 weeks ago with Phil from Usa to aus. He hasnt given me an ETA at this stage.:confused:

USA-69Z

08-07-2009, 03:03 PM

Looks nice :) I had a bit of a drama connecting my sway bar up after the install :( I had to bend the ends of the sway bar in about 1/2" ....I can't remember what but it was hitting something :(

Jim ,My front sway bar is the same , too damn close, how did you bend the sway bar ? can it be done with oxy or does this stuff it???

Gav

RAW454

08-07-2009, 03:11 PM

Bring it on dude! Great to see another progress thread. (Been meaning to do my own, but is like a Stephen King novel of late :p ) Wheels look trick - The pro-tourer style you're going for is sure happening full-steam! Congrats man & look forward to more!!

(PS - That rug in your garage reminds me of a pub stage I used to play on.. Gotta get me one a them too! :D )

tuffss

08-07-2009, 04:03 PM

i ordered the diff and other bits around 5 weeks ago with Phil from Usa to aus. He hasnt given me an ETA at this stage.:confused:

Hi, any chance you could supply a bit more info on Phil from USA to AUS, does he have a website or other contact details, would like to touch base with the possibility of bringing some parts over one day, always good to have a contact, by the way that is some nice gear you have going into your ride.
Cheers
Mick.

rodent

08-07-2009, 04:34 PM

Jim ,My front sway bar is the same , too damn close, how did you bend the sway bar ? can it be done with oxy or does this stuff it???

Gav

Done mine with the torch :D It's been going for the last couple of years with no probs.......If it the same as mine, It may look like a lot but only needs bending a smidge.

USA-69Z

08-07-2009, 10:43 PM

Done mine with the torch :D It's been going for the last couple of years with no probs.......If it the same as mine, It may look like a lot but only needs bending a smidge.

Cheers Jim , yeah i fitted a front rim (no tire)and full locked it , and it is just a smidge as you said.

Thanx for that:)

USA-69Z

08-07-2009, 10:47 PM

Hi, any chance you could supply a bit more info on Phil from USA to AUS, does he have a website or other contact details, would like to touch base with the possibility of bringing some parts over one day, always good to have a contact, by the way that is some nice gear you have going into your ride.
Cheers
Mick.

Mick , heres his web address, USAtoAUS.com i do have his mobile if you need it. If your after specific info regarding pricing etc PM me and ill help out if i can.

Cheers, Gav

tuffss

08-07-2009, 11:18 PM

Mick , heres his web address, USAtoAUS.com i do have his mobile if you need it. If your after specific info regarding pricing etc PM me and ill help out if i can.

Cheers, Gav

No worries thanks Gav much appreciated.

J.J.

09-07-2009, 10:09 AM

those tailights are unique, i doubt there is another 69 in the country with them

USA-69Z

09-07-2009, 10:25 AM

those tailights are unique, i doubt there is another 69 in the country with them

yeah JJ , they just bolt in with no mods at all. They came complete for $260 US and he milled them up while i was there ! they also come in anodized or satin finish.

Gav

J.J.

09-07-2009, 01:23 PM

yeah JJ , they just bolt in with no mods at all. They came complete for $260 US and he milled them up while i was there ! they also come in anodized or satin finish.

Gav

they look killer, i want a pair:) :D

AUSCAMARO

09-07-2009, 10:49 PM

You are a luky man Gav... Nice work!!

69SS

10-07-2009, 11:13 PM

USA-69Z

11-07-2009, 01:21 AM

Gav, looks like in the end it will be a complete rebuild. Looks fantastice so far.. I have a question for you, did your order you KWCs' directly from the states? Thats the exact look that i'm going for 18 x 8, 18 x 10. Currently running 17 x 8 allround.

Cheers

I ordered thru 'showwheels' in queensland. ...$3400 for the set. They did take a 12 weeks to arrive . They told me 6 weeks.... so i went to 'intro'(kwc) in states when on holiday and they were having trouble with 18 inch hoop orders ...thats what they said anyways. Not sure if a direct order would be qwiker....
If i was buying again id go thru Jon at 'driverzinc' , he can do it cheaper and has a good range of rims.

Gav

USA-69Z

12-07-2009, 01:35 PM

New rocker covers fitted today as well

http://i221.photobucket.com/albums/dd202/dragstripper/MY69INTERIORANDENGINE09004.jpg

RAW454

13-07-2009, 10:32 AM

USA-69Z

13-07-2009, 11:12 AM

Sweet-as Gav. Looking slick. Still stunned you got those seats for $200 or whatever - Work SO well with the interior.. and will look even better after a vacuum! :p :D

* Still waiting semi-patiently for pic of wheels fitted *

Deano , im still waiting on tires from the US...PHil from USAtoAUS seems to have gone awol????
Yeah a vacuum would be good but she's gunna sit there for months id reckon , so not to inspired:(

RAW454

13-07-2009, 12:31 PM

she's gunna sit there for months id reckon , so not to inspired:( How come? I thought you had ralleys to get around on & front suspension fitted up now? Or are there more 'suitcase goodies' that you'll be bolting on over these wintery months?

USA-69Z

13-07-2009, 12:37 PM

How come? I thought you had ralleys to get around on & front suspension fitted up now? Or are there more 'suitcase goodies' that you'll be bolting on over these wintery months?

Oh yeah i got rallys on now . But there fat as and now its sittin low, its hard on top of the tires .
Ive still got a cupla bits coming from states but will take months im guessing.
Diff ,new body panels, subframe connectors and 4 tires.

Ps, hows ya guitar skills? we gota 'celibate rifles ' tour coming up and we have lost our rythm player:cool:

RAW454

13-07-2009, 01:59 PM

Ps, hows ya guitar skills? we gota 'celibate rifles ' tour coming up and we have lost our rythm player:cool:
Sounds sweet - Just gotta repaint my axe in Webber Red Bull colours:p 2225

TUFF68

13-07-2009, 04:50 PM

PHil from USAtoAUS seems to have gone awol????
I hope not, he's supposed to be sending me some hinges :confused:

6t8

13-07-2009, 08:15 PM

I hope not, he's supposed to be sending me some hinges :confused:

Gday Marty,how come you didnt buy the hinges direct?.Mine took 6 days to arrive.Barry.

J.J.

24-07-2009, 02:51 PM

Gav, any updates? pics?

USA-69Z

24-07-2009, 04:12 PM

Gav, any updates? pics?

No JJ , waiting on Phil from USAtoAUS next shipment . Due sept 4th:)
cars sitting in shed with no wheels, up on stands. Waiting on tires , diff etc etc. I did trial fit new rim on and i rekon ill have to do a little panel beating on the inners to fit the 10inch rims. always waiting........

Gav:)

USA-69Z

29-07-2009, 03:34 PM

interior shotz

http://i221.photobucket.com/albums/dd202/dragstripper/EBAYCAR017.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/EBAYCAR016.jpg

tonner

29-07-2009, 04:38 PM

looking SWEET Gav.

Sfinx

29-07-2009, 07:16 PM

What seats are those out of Gav?

USA-69Z

29-07-2009, 08:07 PM

What seats are those out of Gav?

96 mazda 626 electric jobs. But had to remove motors as they sat too high.

Sfinx

29-07-2009, 10:13 PM

Sweet, nice work. Looks really good.

Deadwood

30-07-2009, 10:03 PM

Those rocker covers look ****in good!

USA-69Z

09-09-2009, 11:48 PM

Guys , i went down to sydney today and picked up the rest of my bits and pieces. Phil (usatoAUS) had also brought in a cupla f100 rat rods. flat black 50s models with airbags , pinstripes,whitewalls etc very cool trucks. Nice lambo there too , was on hold by customs with price (cost) discrepency.
anyways , all was what i ordered and in good shape.

New rims now have Nitto 555 tires fitted.
http://i221.photobucket.com/albums/dd202/dragstripper/PARTSUSA004.jpg

Subframe Connectors
http://i221.photobucket.com/albums/dd202/dragstripper/PARTSUSA005.jpg

USA-69Z

09-09-2009, 11:51 PM

3.7 ratio moser rear ..... gunna feel good after that 2.75 single wheeler!

http://i221.photobucket.com/albums/dd202/dragstripper/PARTSUSA003.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/PARTSUSA001.jpg

2 front RS front guards with extensions
http://i221.photobucket.com/albums/dd202/dragstripper/PARTSUSA002.jpg

AUSCAMARO

10-09-2009, 12:21 AM

MMMMMmmmmmm, I'm feeling very left out about now...

Lots of goodies there Gav..

Mitch

USA-69Z

10-09-2009, 12:32 AM

Im actually having second thoughts on the rims.. I dont think im into them .. ill fit them up tomorrow and have a a think .May end up on the market.:confused:

RAW454

10-09-2009, 10:37 AM

Im actually having second thoughts on the rims.. I dont think im into them .. ill fit them up tomorrow and have a a think .May end up on the market.:confused:
"cos "looks good" changes"?? :p :D

Even after all the resarch you've done? Give 'em a go - Maybe getting cold feet coz is such a change from what you have now (Generally more pro-touring direction). Can always paint them gunmetal if changed mind on the finish! Gotta be wrapped about all the other stuff (finally) too eh! Those 3.7s will feel sweeeeeeeet!

18htan

10-09-2009, 10:48 AM

DO you have some other pics of the rims...?

USA-69Z

10-09-2009, 11:13 AM

DO you have some other pics of the rims...?

Ill have them fitted up today but not driven. Just setting up the stance , lowering etc. will post a pic or 2 late the sarv:)

67cammy

10-09-2009, 12:40 PM

Gav I reckon they are going to look REAL NICE. You're as bad as me for changing wheels. Are those bolts/rivets countersunk. Would be a bit of a pain to keep it clean in there. Can't wait for these pics

Nev68

10-09-2009, 02:23 PM

3.7 ratio moser rear ..... gunna feel good after that 2.75 single wheeler!

Early Christmas!
Can you show some progress pics when you put the diff in?

USA-69Z

10-09-2009, 03:04 PM

front is set at ride height , rear will come down 2.5 inches.

excuse the dust all over it:p

nev- will do !

http://i221.photobucket.com/albums/dd202/dragstripper/NEWRIMFITMENT001.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/NEWRIMFITMENT003.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/NEWRIMFITMENT011.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/NEWRIMFITMENT012.jpg

WILD68

10-09-2009, 03:19 PM

cluxford

10-09-2009, 03:20 PM

Gav,

Those rims look great. What width are they on the rear ?

USA-69Z

10-09-2009, 03:26 PM

Gav,

Those rims look great. What width are they on the rear ?

hi Chris , rears are 18 x 10 with 275/40 , front 18 x 8 with 245/40. the 10s fit easy , heaps of room for another inch i reckon... bit suprised by that.

Gav:)

18htan

10-09-2009, 03:41 PM

Hey Gav, I think they look great.

How are you feeling about them now that they are on?

USA-69Z

10-09-2009, 03:45 PM

still not sure ...if sum1 wanted em??
paid $3600 rims only .
offers:confused: :o :confused: :(

18htan

10-09-2009, 03:57 PM

Still not sure...

Geez mate... Grab a beer and a deck chair... Sit on your lawn and keep looking!

They will grow on you!

67cammy

10-09-2009, 04:03 PM

Gav I like em. The shot of the front of the car looks magic. Are you going to lower the back? See how you feel about them after you do that maybe. Personally I think they look pretty excellent, but with my track record on wheels you should be listening to every one else. Thumbs up mate

RAW454

10-09-2009, 04:45 PM

I rate 'em for sure!! Is part of the new look dude. With gleamin polished up paint work and the 2.5" out of the back height you mentioned it will look phat as :cool: Spesh the dish on those 10s. Nice one bro!!

USA-69Z

13-09-2009, 02:34 PM

Been tearing the old diff out today... 10 bolt 2.78 gears single wheeler.

http://i221.photobucket.com/albums/dd202/dragstripper/DIFFREMOVAL004.jpg

New diff ready to go in.
specs -
Includes: New Moser 3.7 ratio 12-Bolt Casting with OEM located mounting provisions, 30 Spline Bolt-In Axles, Axle Bearings, Stock Wheel Studs, Retainer Plates, Eaton Posi, Ring & Pinion, “1310” Series Pinion Yoke, Chrome Cover, Differential is set up w/Timken Bearings, OEM 10” Drum Brakes Completely assembled.
http://i221.photobucket.com/albums/dd202/dragstripper/DIFFREMOVAL012.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/DIFFREMOVAL009.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/DIFFREMOVAL003.jpg

Ford backing plates ???

http://i221.photobucket.com/albums/dd202/dragstripper/DIFFREMOVAL002.jpg

WILD68

13-09-2009, 03:09 PM

See on the end of your axles there is no Moser logo.. same as mine, dont know why they dont always put em on..( black n red sticker )??

Nev68

13-09-2009, 03:43 PM

Been tearing the old diff out today... 10 bolt 2.78 gears single wheeler.

Ford backing plates ???

Gav,
Is this a pure "bolt in" job.
Do you have to change brake proportioning valve or anything like that?

USA-69Z

13-09-2009, 07:58 PM

Gav,
Is this a pure "bolt in" job.
Do you have to change brake proportioning valve or anything like that?

as far as i now Nev it is a bolt in job.... we'll see if there is any hidden gremlins to sort out.

camaro_1967rs

14-09-2009, 12:06 AM

See on the end of your axles there is no Moser logo.. same as mine, dont know why they dont always put em on..( black n red sticker )??

same as mine jamie, i have billet 31 spline mosers, its stamped as a casting mark on mine. maybe they still have some of the early billet stuff and the logos are on the newly made stock?

AUSCAMARO

14-09-2009, 01:53 AM

I just noticed why you changed your username Gav!!

Nice plates mate... When did you get them? Did you order those or just happen to be lucky enough to get the right characters at the right time?

Mitch

RAW454

14-09-2009, 10:01 AM

I just noticed why you changed your username Gav!! Nice plates mate... Using your rego plates as a Username?? Pfft.. That's like SO Nov '08 :p :D :D

J.J.

14-09-2009, 10:29 AM

http://i221.photobucket.com/albums/dd202/dragstripper/NEWRIMFITMENT001.jpg

Gav, my honest opinion, sorry to say, i don't like them at all. They looked ok without tyres, but mounted they just look "cheap". They dont suit the car at all IMO. :mad:

Its so hard getting the right rim, i just feel that these rims detract from the look of your car, which you know i love! I don't like the bent spokes, and the all chrome/polished look just doesnt sit right. :( :( :(

J.J.

14-09-2009, 10:36 AM

mabye if the centres were painted black, would help??

http://img232.imageshack.us/img232/2596/69camaro21.jpg (http://img232.imageshack.us/i/69camaro21.jpg/)

TUFF68

14-09-2009, 11:00 AM

Using your rego plates as a Username?? Pfft.. That's like SO Nov '08 :p :D :D
hahaha.........some people just lack imagination ;) :D

How would those rims look with a satin center and polished lip ?

USA-69Z

14-09-2009, 11:15 AM

Geez , a tuff crowd today:o
Mitch- i just punched the plates into the computer a cupla years ago and they were available. $90 a year to have these.
JJ - I know what your saying. They are to bling for me aswell. They are polished alum but its like chrome .

Marty - I have thought about hitting them with a scourer or fine paper to satin the centers up ? but risky. If i can unload them ill get some others.

Gav:(

USA-69Z

14-09-2009, 12:25 PM

This Pic should have been at the beggining of thread .
Brought over from Cali in Sept 2006 by me thru Micks Musclecars.

http://i221.photobucket.com/albums/dd202/dragstripper/rightside.jpg

camaro_1967rs

16-09-2009, 12:31 AM

Marty - I have thought about hitting them with a scourer or fine paper to satin the centers up ? but risky. If i can unload them ill get some others.

Gav:(

A thought, and it should not damage the rims at all: if you want to experiment with some different coloured centres, why not use some childrens paint that desolves in water and is a solid colour? once finished use a sponge and soapy water to remove.

I think its the vertical edges on the rims vs flowing lines on something like Torque Thrusters. The could look fantastic if you ventured down the above track.

White might look good but very 90's, grey would introduce another colour to the car, red would be Yuk, Black would compliment the stripes and would not allow the eye to see the centre detail.

thats my 20 cents.

67SS502

16-09-2009, 11:05 AM

Hey Gav

You will love the moser 12 bolt, it was fairly easy to bolt it in and lays some of the nicest marks. They are worth every cent. Also i had to stick on the Moser sticker at the stud end of the axle (it was for warranty purposes) when i was finished
cheers

USA-69Z

16-09-2009, 11:19 AM

Paul, i have thought about that (paint) If i could just sell them ive got my eye on some new ones. I mite start a wheel thread with sizes etc.

Ben, You got stickers !:confused: I didnt get any paperwork or stickers or anything with mine. Something about shipping out of the crate for customs reasons:o :o

Gav

J.J.

16-09-2009, 11:58 AM

what wheels do you have your eye on?

USA-69Z

16-09-2009, 12:06 PM

what wheels do you have your eye on?

These are RUSHFORTH RATED X black center, polished lip
http://i221.photobucket.com/albums/dd202/dragstripper/69camaro_Silver_BlackRatedX_2.jpg

OR

http://i221.photobucket.com/albums/dd202/dragstripper/Oliverscamaro001.jpg

AUSCAMARO

16-09-2009, 12:26 PM

1x set of each thanks Gav... They are hot!!

Your next step is to ask Birchy to photoshop these onto a side shot of your car!!

J.J.

16-09-2009, 04:43 PM

i have a feeling you may find yourself in the same position if you get either of those rims

USA-69Z

16-09-2009, 08:19 PM

i have a feeling you may find yourself in the same position if you get either of those rims

you dont likem' JJ ? got any suggestions .Im open to ideas:confused:

68cmaro

16-09-2009, 08:36 PM

I like the 2nd ones but IMO I would like them without the rivets, rivets IMO make them look like they should be on a Skyline or Commonwhore in other words I think they suit the late model cars better

Only my opinion CHRIS

Twisted67

17-09-2009, 09:59 AM

What about these ones gav??
2971

68cmaro

17-09-2009, 10:27 AM

What about these ones gav??
2971

My choice (no rivets) look like Fikse's

J.J.

17-09-2009, 10:33 AM

you dont likem' JJ ? got any suggestions .Im open to ideas:confused:

what size rim/tyre do you want to run?

J.J.

17-09-2009, 10:45 AM

IMO, its all about rim/tyre size and stance. I am not a huge fan of these wheels, but the car has the perfect stance, the perfect tyre (most important IMO) and rim size with mega dish out back. So all up the car looks CRAZY with these wheels

http://img248.imageshack.us/img248/1980/madr.jpg (http://img248.imageshack.us/i/madr.jpg/)

http://img41.imageshack.us/img41/7421/mad2j.jpg (http://img41.imageshack.us/i/mad2j.jpg/)

AUSCAMARO

17-09-2009, 02:20 PM

OOh, I like them too.

I'm thinking that it's either a spun alloy type finish or a grey centre type finish. They seem to be all the go right now. Full chrome is sooo yeaterday! ;)

USA-69Z

17-09-2009, 02:38 PM

OOh, I like them too.

I'm thinking that it's either a spun alloy type finish or a grey centre type finish. They seem to be all the go right now. Full chrome is sooo yeaterday! ;)

yep, im thinking matt black or a gun metal type centre . I may have to stick mine on evilbay:eek: if i get close to 3gs ill need $1500 more to make up for the new ones:(

J.J.

17-09-2009, 04:02 PM

Gav you like the ones i posted? i reckon they would look killer on a slammed 69 Camaro

USA-69Z

17-09-2009, 06:06 PM

Gav you like the ones i posted? i reckon they would look killer on a slammed 69 Camaro

I do JJ, but im thinkin a bit less chunky on the spoke side of things. I want a lightweight style race rim to compliment the pro touring theme:confused:

tonner

17-09-2009, 09:44 PM

These are my rims, there Foreglines.

2988

cluxford

17-09-2009, 09:48 PM

These are my rims, there Foreglines.

2988

http://i156.photobucket.com/albums/t37/cluxford/general%20photos/tolmol_124293992222658_finalcustomi.jpg

USA-69Z

17-09-2009, 09:50 PM

These are my rims, there Foreglines.

2988

Whats the sizes/specs Greg? mini tubs or ?

tonner

17-09-2009, 10:01 PM

Whats the sizes/specs Greg? mini tubs or ?

Yea mini tubed, 18 x 12 rear 18 x 10 front, I bough a set of 18 x10 rear as well for rego as you can't have stagger here in the West, i will be running 345 rear tires.

Greg

USA-69Z

17-09-2009, 10:04 PM

Yea mini tubed, 18 x 12 rear 18 x 10 front, I bough a set of 18 x10 rear as well for rego as you can't have stagger here in the West, i will be running 345 rear tires.

Greg

How are you getting 10s on the front , i didnt think that was possible ?
Is there some major mods or a-arm action?

AUSCAMARO

17-09-2009, 10:09 PM

Bloody hell Greg.. Your certainly not going about your build the wrong way are you... Everytime you put up a picture of something you have done or brought it's just what I would do or want if I had the moola and/or time!!

Nice rims!

tonner

17-09-2009, 10:31 PM

How are you getting 10s on the front , i didnt think that was possible ?
Is there some major mods or a-arm action?

No it's all good with the Morrison front end. and you know what is really good I got these when the dollar was at 94c.

Greg

69SS

18-09-2009, 12:11 AM

Man, sorry to hear your not too keen on the new rims.. Thats a real bummer mate.. Im kinda with you but.. kinda look a little chunky, and dont suit the look you are after.. IMO ;)

Have you checked out the Fesler 2 and 3 piece wheels.. they are pretty sweet, my choice after the Rushforths. ooh and the Forgelines are super sweet too, nice choice Greg.

USA-69Z

18-09-2009, 12:46 AM

TUFF68

18-09-2009, 10:39 AM

These are my rims, there Foreglines.

2988
Nice wheels Greg, what other goodies you got to show us or have you only received your rims for now. Waiting to see that Morrison front end :)

USA-69Z

18-09-2009, 12:55 PM

UUUMMMM - Back to my build thread please guys:cool:

getting rear springs re-set today , 3 inches down $ 245 bux
Pickup tuesday

J.J.

18-09-2009, 03:01 PM

Gav, i've been looking at some Rushforth's, i reckon the Rated X are a little modern for the car. Will be very hard to pull off IMO. I really like these ones

Live Wire - for a racey look, but been done many times before
http://img43.imageshack.us/img43/188/livewiremedium.jpg (http://img43.imageshack.us/i/livewiremedium.jpg/)

Sharp shooter - these are different, unique, would look killer with black or gunmetal finish. Must have deep dish on the rear
http://img200.imageshack.us/img200/6387/sharpshootermedium.jpg (http://img200.imageshack.us/i/sharpshootermedium.jpg/)

Wild Side - Similar to the Rated X but larger spokes, easier to pull off IMO
http://img16.imageshack.us/img16/2985/wildsidemedium.jpg (http://img16.imageshack.us/i/wildsidemedium.jpg/)

USA-69Z

18-09-2009, 07:30 PM

yeah , now ya talkin'. i got my eye on a cupla these designs , just gotta choose right this time :(

Twisted67

18-09-2009, 07:46 PM

Live wire's!!!!:D

camaro_1967rs

18-09-2009, 09:19 PM

Did some surfing over the past couple of nights with this thread in mind. If were looking for wheels with an open cheque book these are what I would concider, favoring the Rally Lookalike but with billet centres and larger sizes.

http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/wheels-max_zip_thumbnail1_jpg51e10e.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/rocket-wheels-gloss-black-booster.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/newBBS_sized.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/85-UL.gif
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/camaro-wheel.jpg
My favorite the hallibrand look
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/FW_1007_500.gif
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/image.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/gmp18_69_Camaro_Yenko_orang.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/DSC_0058.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/DSC01833.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/BlackedoutZ.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/116_0701_08_z1970_buick_ersatz_gsxs.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/IMG_0263.jpg
http://i180.photobucket.com/albums/x102/bucketofbubbles_detailing/IMG_3990.jpg

68cmaro

19-09-2009, 11:14 AM

Gav

They look s**t hot if you are staying red IMO

2996

Not far different than the wheels that you have just bought !!

Maybe paint the centres of your new wheels with black tyre paint and see what they look like.

If no good just wash the tyre paint off, a lot cheaper than a new set .... worth a try

camaro_1967rs

19-09-2009, 06:10 PM

Gav

They look s**t hot if you are staying red IMO

2996

Having a red car myself this was the choice i was going to make if going prostreeter.

I agree this just needs nothing, sometimes understating things is the best proposition.

I reckon stay with the current wheels and have the centres power coated or two paked black, this will fit in with your black stripes and paint.

There you go my two cents worth, and this should be timeless, I personally I think the big wheels have had their day on classics, they may look good but the ride is rubbish, from personal experience.

camaro_1967rs

19-09-2009, 06:12 PM

2996

Maybe paint the centres of your new wheels with black tyre paint and see what they look like.

If no good just wash the tyre paint off, a lot cheaper than a new set .... worth a try

Good to see someone sees my point of view of using a cheap water based paint to see if the black centres suit the car or not. Just wash it off if not happy, if happy take the rims off and take them down to get two paked or powder coated.

69SS

19-09-2009, 06:38 PM

they would would look cool with black centers. try the water based paint trick and post pics :)

USA-69Z

25-09-2009, 07:20 PM

Latest Update - Friday 25th Sept 09'

Had to get new multi spring plates drilled out to a larger diameter to fit the oversize shackles .
http://i221.photobucket.com/albums/dd202/dragstripper/SPRINGMOUNTS001.jpg
Had rear Hotchkis leaf springs re-set another 3inches lower.That gives me 4 1/2 lower than standard height. New gas shocks on rear. New Moser Posi rear fitted up nice with no dramas . New spring bushes etc.
Had to trim to edge of spot welds on rear guard lips to be safe fit with new rims and tires.
Finally got to drop it to the ground to see how it all fits/looks.
Heaps of room inside and out with the 10inch rims. Pretty happy with the result today.
http://i221.photobucket.com/albums/dd202/dragstripper/REAREND09010.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/REAREND09002.jpg
http://i221.photobucket.com/albums/dd202/dragstripper/REAREND09007.jpg

http://i221.photobucket.com/albums/dd202/dragstripper/REAREND09008.jpg

tonner

25-09-2009, 07:24 PM

Looks great Gav, the Wheels look good on the car.

Greg

Twisted67

25-09-2009, 07:26 PM

Lookin good there gav.
When you get time can you back her out n take pic or 2 side on to see what she looks like!!
I reckon the rims look pretty good in those pics???

Paul

454 NUTTR

25-09-2009, 10:07 PM

USA-69Z

25-09-2009, 11:59 PM

with them brake drum's paint them black so they don't take so much away from the wheel i think them wheel's look mint put a black rag over the drum put the rim on then stand back to get the idea of what it will look like black might help ;) ;)

Yep , i plan too .The shocks arnt fitted in them pics or the tailshaft , brake lines etc. Just a test fit to see if things would rub. All clear , so it will back on stands on sat for a paint and finishup.

See the dust all over it... we had a major dust storm on wednesday. That came under the shed door.

AUSCAMARO

26-09-2009, 08:16 AM

.

See the dust all over it... we had a major dust storm on wednesday. That came under the shed door.

Yeah sure sure Gav.... Any excuse to get out of washing the car :D

It's looking pretty good in that shot Gav, the wheels look like they are meant to be there now. Certainly more of that Pro-Touring look now she lowered.

Mitch

USA-69Z

26-09-2009, 06:12 PM

ok had a few beers this arv:p and found a cupla old pics to throw up and have look at.

My old 68 with my 'ex missus' in pink and my blazer for sale at the rickshaws hotrod show n shine
http://i221.photobucket.com/albums/dd202/dragstripper/blown022.jpg

USA-69Z

26-09-2009, 06:16 PM

A cupla shots i like of the old gurl
http://i221.photobucket.com/albums/dd202/dragstripper/A1PIC.jpg

http://i221.photobucket.com/albums/dd202/dragstripper/100_0022.jpg

And this is the day it got shipped off to south Oz :(

http://i221.photobucket.com/albums/dd202/dragstripper/100_0054.jpg

USA-69Z

26-09-2009, 06:19 PM

One more for the road :p :p :p

This is my mates workshop , he's the local jag specialist and owns a qwik ford

http://i221.photobucket.com/albums/dd202/dragstripper/100_0686.jpg

chevelle

26-09-2009, 06:21 PM

USA-69Z

26-09-2009, 06:25 PM

I have his name sumwhere but im pretty sure a LOT of people know the guy.
Not very well liked from what i hear:confused:
General manager of holden (brian kellys?) in adelaide. Owns a few chevs i believe.

5 or 6 years ago maybe ...

chevelle

26-09-2009, 06:26 PM

USA-69Z

26-09-2009, 06:29 PM

No he sold it 2 weeks later for a profit to a guy in sydney. 3 doors from the guy i originally bought it from !!

chevelle

26-09-2009, 06:34 PM

Yep allways the case, but to go 3 doors down, amazing, so is still getting around.

USA-69Z

26-09-2009, 06:35 PM

a guy in penrith owns it and it changed colour

http://i221.photobucket.com/albums/dd202/dragstripper/dazpicsofcamaro004.jpg

chevelle

26-09-2009, 06:37 PM

I think i would of left it the colour it was.........

blackoutsteve

26-09-2009, 07:37 PM

My old 68 with my 'ex missus' in pink and my blazer for sale at the rickshaws hotrod show n shine
http://i221.photobucket.com/albums/dd202/dragstripper/blown022.jpg

She was what I noticed first in that picture. She's attractive..
Then I read the text. "..my 'ex missus'..".

AUSCAMARO

26-09-2009, 07:49 PM

How long ago was that Gav? I think I remember seeing that Blazer around somewhere?

USA-69Z

26-09-2009, 08:19 PM

How long ago was that Gav? I think I remember seeing that Blazer around somewhere?

Not sure , around 6 years ago or 4 or :confused: :confused:

USA-69Z

26-09-2009, 08:20 PM

She was what I noticed first in that picture. She's attractive..
Then I read the text. "..my 'ex missus'..".

Yep she had a good motor in er' that one :D thirsty little thing she was ;)

RAW454

27-09-2009, 07:27 PM

I think i would of left it the colour it was.........x2!! Oh, just realised that was a joke! (? Diffrent mirrors etc) Dang I love(d) that ride. Spesh the engine bay. Never saw it with 454 badges before though Gav - Just assumed was SBC like yr 69? Thought imposssble to get big-block out of the system? ;)

PS - Happy with sizing b/s of your new rims/tyres?

USA-69Z

28-09-2009, 07:37 PM

Deano, im gunna try and floggem' off if i can. They do fit perfect with no rubbing issues i can see. I just got my heart set on some rushforths either 'superspokes ' or 'rated-x' in brushed satin , black or grey centres:confused:

If they dont sell ill just live with them.:o

Gav

RAW454

29-09-2009, 02:58 PM

USA-69Z

29-09-2009, 05:09 PM

[QUOTE=USA-69Z;23860]Deano, im gunna try and floggem' off if i can./QUOTE]Yeah, was more wondering if you are happy with the sizes of the rim & tyre combo plus the offset. You did a heap of research on it, and just curious if was as expected & will stay same for newbies...

yeah , will stick with exact same sizes. as they fit perfect up under the guards , had to trim 1/2 inch off inside lip but thats it. could go lower in rear if wanted.

Update- tues 29th sept. Day in the shed....
finished tightening diff mounts , spring mounts, hooked up brakes and handbrake cables. Sway bar is on . painted all pretty. Oil is in.
1 thing stopped progress. The lower shock eyes in the multi plates is at the wrong angle for the shock bolt to go thru. So i will need to heat the plate above the eye and bend to 90 Degrese. Trouble is i aint got an oxy:(

USA-69Z

07-10-2009, 02:31 PM

UPDATE :eek: 7TH OCT 2010...

finally got all bolted together and on the ground. Bled brakes up. Still not hard enuf , not sure why?
still dont dig the rims:(
the thing is covered in plenty o dust...
Positive things , i have no rubbing of guards .

http://i221.photobucket.com/albums/dd202/dragstripper/004-5.jpg

WILD68

07-10-2009, 02:37 PM

67cammy

07-10-2009, 03:09 PM

still dont dig the rims:(

I dunno Gav. I still reckon they look damn nice. Your ride height is perfect. Love it :)

chevelle

07-10-2009, 03:18 PM

Gav, try this, undo all 4 bleeders from brake cylinders, make sure master cylinder is full, pump brakes about 4 to 5 times, fluid goes everywhere, so if you dont want this to happen connect rubber hoses to the outlets and either to a rag or inside a bottle or can. Once pumped, do up all the bleeders and start the bleeding process from furtherest cylinder from master cylinder forward.
It should give you a good pedal.

J.J.

07-10-2009, 03:25 PM

Gav stance is perfect! If you don't look at the car and think, damn that looks crazy, then ditch the rims! Rims make a car IMO. Its worth every cent to get the look you want. Can you post any 3/4 shots of the car?

454 NUTTR

07-10-2009, 03:36 PM

nice and low there gav like they are all sayying them rim's look mint

USA-69Z

07-10-2009, 03:40 PM

J.J.

07-10-2009, 03:55 PM

sweet, any front on 3/4, i wanna see how much the wheels/tyres fill out the guards. it looks like they fill them really well.

USA-69Z

07-10-2009, 04:24 PM

http://i221.photobucket.com/albums/dd202/dragstripper/005-3-1.jpg

69coupe

07-10-2009, 05:21 PM

Gav
Love the car but being old school, I reckon the rim diameter is to big. "Prefer a more "old school look"
Stance is perfect

Sfinx

07-10-2009, 06:29 PM

I reckon it looks badass.

Having said that, I'm with JJ, if you don't like, change em. Rims make the ride.

454 NUTTR

07-10-2009, 09:08 PM

68cmaro

07-10-2009, 10:54 PM

hay gav just looking at your build and seeing that u are running the same shifter as me. I just want to know how do u have it sitting? is it sitting on the floor or sitting on something? cos I just had a quick look at mine and ssw that shifter sit's about 20 mm below the outer case. any tip's on it?

Hi Scott

If you are using a factory console you need to have a block of ally about 20mm high bolted to the floor under the shifter.

If you are just using the B&M shifter on its own you need to trim the the black plastic casing by the desired amount to fit the floor, a good sharp pair of scissors will do the trick, just trim about 5 mm at a time until you get the desired height.

If you stuff it up I have a couple of spare housings ;) ;)

Cheers CHRIS

USA-69Z

07-10-2009, 11:01 PM

hay gav just looking at your build and seeing that u are running the same shifter as me. I just want to know how do u have it sitting? is it sitting on the floor or sitting on something? cos I just had a quick look at mine and ssw that shifter sit's about 20 mm below the outer case. any tip's on it?

Scott, mines on the floor. I trimmed the plastic with a dremmel with a cutting blade. Measure from floor to top of shifter mounts. Then use that measurement to mark from top of plastic case down , trim that bottom section off. Had two quiksilvers now and both done same way.

UIW-814

07-10-2009, 11:41 PM

Ok I will give my opinion like everyone else is.

The ride height looks great ,the offsets look great, the size of the rims and tyres look great but the rims need the centres painted a charcoal / grey type colour in a satin type finish to make them look right.

The centres are way to shiny and look to blingy considering the rest of the car is a totally stock standard look.

As many have allready said rims and stance can make any car look good if you get it right.

Cheers.

USA-69Z

08-10-2009, 12:34 AM

69SS

08-10-2009, 02:26 AM

Geez Gav I kinda like them, especially the rear 3/4 view, the dish on the back looks sick!! I think if you had satin or flat balck centres it would really break up all the bling, but hey in the end if you are not happy then that is all that matters. The stance is spot on, exactly what I will be chasing.

454 NUTTR

08-10-2009, 07:37 AM

Thanks Chris & Gav had plenty of B&M Shifters but have all ben Pro ratchet. Thaks for the advice i think ive got the ball rollng now. I might have to take you up on one of throse casings knowing me ill stuff it up.I'll let you know on due time!

J.J.

08-10-2009, 09:36 AM

http://i221.photobucket.com/albums/dd202/dragstripper/005-3-1.jpg

wheel size and offset is perfect IMO:D looks great, fills the arches so well!

RAW454

08-10-2009, 09:56 AM

The ride height looks great ,the offsets look great, the size of the rims and tyres look great but the rims need the centres painted a charcoal / grey type colour in a satin type finish to make them look right.100% x2. Everything about them looks awesome, and if you got the centres painted/annodized gunmetal or something it would be absolutely sick looking unit.

Maybe Birchy can retouch the spokes to give you an idea? Or just try that water-based paint solution that has been grought up - Nothing to lose, and can still keep them on the market while try it one day...

USA-69Z

08-10-2009, 10:22 AM

http://i221.photobucket.com/albums/dd202/dragstripper/frontendbuild008-1.jpg

WILD68

08-10-2009, 12:03 PM

Gav how does it feel now with the diff ratio change?

USA-69Z

08-10-2009, 12:05 PM

Gav how does it feel now with the diff ratio change?

Jamie , i havnt give it a squirt yet . Slow Steady drive round the block to make sure nuthin falls off ..Also is on empty so was expecting to run out

Gav

69SS

09-10-2009, 01:49 AM

Engine bay looks great Gav. Bet the smile on your dial was priceless on the first spin !

USA-69Z

09-10-2009, 08:52 AM

Engine bay looks great Gav. Bet the smile on your dial was priceless on the first spin !

More that clenched arse cheek feelin' waitin for a clunk !

RAW454

12-10-2009, 11:57 PM

100% x2. Everything about them looks awesome, and if you got the centres painted/annodized gunmetal or something it would be absolutely sick looking unit.
Kinda like...

3276

But more dark grey than pure black.

AUSCAMARO

13-10-2009, 12:05 AM

That looks better already!!

TUFF68

13-10-2009, 12:34 AM

That looks better already!!
yep, definately....

69SS

13-10-2009, 12:40 AM

Really makes a huge difference.... Still no clunks Gav, have you taken her any further yet??

S[_]SPECT

13-10-2009, 01:55 AM

But more dark grey than pure black.

Is this too light ??
http://i483.photobucket.com/albums/rr195/SI_ISPECT/Cart/PShop%20Mods/GavsSatinGrey.jpg

I also tried for an anodised black.. it looks better on my other monitor.. it looks a bit blue on this one..
http://i483.photobucket.com/albums/rr195/SI_ISPECT/Cart/PShop%20Mods/GavsAnodBlk.jpg

USA-69Z

13-10-2009, 08:51 AM

WoW! thanks guys ! that really does give me more to think about..
I was struggling with either a matt black center or a brushed satin center with the polished hoop. Now i can see how it could look.
KUdos to yous:)

J.J.

13-10-2009, 01:13 PM

Nice avatar Gav :D

USA-69Z

15-10-2009, 02:05 PM

Finally got the F Truck sorted today , ready for NSW rego on monday. Running sweet
http://i221.photobucket.com/albums/dd202/dragstripper/F100PICS15-10-09004.jpg

http://i221.photobucket.com/albums/dd202/dragstripper/F100PICS15-10-09003.jpg

RAW454

15-10-2009, 02:53 PM

That's some funky-ass (pink pebble?) dash treatment there Gav. Woulda gone well with the hexagonal-windowed canopy! :D Haha Good clean truck there mate, big tyres add loads of tuffness eh. Must be pleased ;) Nice one. (Wonder how it would look with 18" Intros... Haha...)

S[_]SPECT

15-10-2009, 03:44 PM

big tyres add loads of tuffness eh.
As does the bullet hole in the door ..

USA-69Z

15-10-2009, 04:31 PM

SPECT;25274']As does the bullet hole in the door ..

Funny you say that Birchy.. ive had a real good look at that and it sure does look like one:confused:

S[_]SPECT

15-10-2009, 05:25 PM

Funny you say that Birchy.. ive had a real good look at that and it sure does look like one:confused:

I just noticed the matching hole in the A-pillar on the passengers side !!

let me guess.. you got it REAL cheap with new seats and carpets ??

USA-69Z

24-10-2009, 05:51 PM

Heres a cupla new pics i took today ...as i actually moved it out of the shed... no real progress except the subframe connectors fell off a box down the side of the car overnight somehow? 2 dints and about 8 major scratches:mad:
Tried to polish out ... still got dints ... means the new paintjob will be after xmas..
http://i221.photobucket.com/albums/dd202/dragstripper/MYCAMARO24THOCT09014.jpg

http://i221.photobucket.com/albums/dd202/dragstripper/MYCAMARO24THOCT09011.jpg

USA-69Z

24-10-2009, 05:53 PM

Heres the new 12 bolt fitted up ...all nice and new and ready for smoke:D

http://i221.photobucket.com/albums/dd202/dragstripper/MYCAMARO24THOCT09021.jpg

heres the new rim fitment with the 10s

http://i221.photobucket.com/albums/dd202/dragstripper/MYCAMARO24THOCT09007.jpg

AUSCAMARO

25-10-2009, 08:20 AM

http://i221.photobucket.com/albums/dd202/dragstripper/MYCAMARO24THOCT09014.jpg

HOT DAMN, thats a mean stance!!

The rims look real good from that angle as well..

I'm liking it!!

Spewing about the dents and scratches. I had almost the same thing happen to my Rotary AFTER it was resprayed. Drivers door scratch caused by a steel rod falling off the cabinet...:mad: And just last week I pulled the cover off the Camaro to show someone and low and behold, there is a dent on the Right Door from where my boy gets out of the Prado.... I'd half suspected that it would happen :mad:

USA-69Z

25-10-2009, 09:37 AM

Yeah Thanx Mitch, they are growing on me (rims) but ebay is looking promising this time round so i may be able to get the new black centers i want:o .
the scratches/dints are a bugger , but as my paint isnt great it just means i have to bring foward my plans for paint and panel a bit faster.. I have 2 new guards i brought home from US in the garage from National Parts Group and ill buy all new doors & boot , bonett is new already.
Heading back over in Jan/feb so more parts to buy....

AUSCAMARO

25-10-2009, 02:37 PM

I was just looking at the profile pic again and noticed how well your exhaust system has been tucked up under the car. Good thing too... She's low now!!

RAW454

25-10-2009, 06:22 PM

HOT DAMN, thats a mean stance!!
Hells yeah!! Perfection :cool: :cool:
Sux about the bodywork biffo.. Happened to to many of us..

Nev68

25-10-2009, 07:56 PM

Heres a cupla new pics i took today ...as i actually moved it out of the shed... no real progress except the subframe connectors fell off a box down the side of the car overnight somehow? 2 dints and about 8 major scratches:mad:
Tried to polish out ... still got dints ... means the new paintjob will be after xmas..

Gav, It's better than the roof falling on your car:(

http://i337.photobucket.com/albums/n387/nev68/Ceiling.jpg

Now that's something to spew about, and I couldn't polish it out!

Did you have multi springs before you put the Moser diff in?
What sort of springs do you have in the rear?

USA-69Z

25-10-2009, 08:55 PM

69SS

26-10-2009, 01:34 AM

The stance is spot on Gav, how much clearance do you have from the lowest point.

I really like the way the wheels are tucked right up into the guards, hopefully ill get mine to look the same.. its amazing how much better the wheels look with it dumped like that!! Do you get any rubbing at all??

Like the boys said stupid sh*t always happens, even if you are super carefull My nephew once run his mini bike into my newly painted rangie, just spent 4 weeks on the P&P.. Nearly killed him !!

Good luck on ebay.

USA-69Z

26-10-2009, 09:34 AM

Lyndsay , as far as i can see no rubbing at all. Its funny my old torque thrusts in 17 x 9.5 with same backspace rubbed slightly , and theae are 10s and no rub :confused:

any ways i sold them this morning !!! a guy in brisbane with a 67 impala.
They will look nice on his car.

Gav

Nev68

26-10-2009, 01:53 PM

Hey Nev , i actually thought about your roof cave in when i discovered my mess. I think i woulda almost cried..
as far as springs go i had mono leafs originally and bought hotchkis 1 1/2 drop multis .I ran them for a while on the mono perches with the 10 bolt. I just recently had them re-set 2 1/2 lower ($250) and now have the posi rear and swaybar and qa1 shocks on rear. Also had to get the multi spring plates and oversize u bolts to hold it all together.

Gav

I was closer than "almost" crying. Call me a sook, but you all know how much time and effort goes into these things and at the very least it p!sses you off when they get damaged.

So to clarify, are the springs 1 1/2 drop and then a further 2 1/2 (total 4 ") or total drop is 2 1/2 inches?

USA-69Z

26-10-2009, 02:46 PM

total of 4 inches as it sits now..If you look at the earlier pics in my thread that is with 1 1/2 drop. (with the tourqe thrust rims)

69SS

27-10-2009, 02:35 AM

Rubbing on the old wheels was probably due to having a larger sidewall and more bulge.. Have you decided on the finish for the new wheels??

USA-69Z

11-11-2009, 09:16 PM

Rubbing on the old wheels was probably due to having a larger sidewall and more bulge.. Have you decided on the finish for the new wheels??

sorry Lyndsay, i havnt looked at this thread for yonks..... im waiting to see yours on your car ! cant wait. .. im ready to buy rims NOW but still undecided on rated x or superspokes:o :o :o . Finish will be satin centers definatly.
Dollars going up , wheel price is coming down. I havnt been near my car for a month.:( Its extremely dusty and has no wheels ....sux

OldIndian

11-11-2009, 09:33 PM

Your 69 is an absolute credit to you Gav.

69SS

11-11-2009, 09:39 PM

sorry Lyndsay, i havnt looked at this thread for yonks..... im waiting to see yours on your car ! cant wait. .. im ready to buy rims NOW but still undecided on rated x or superspokes:o :o :o . Finish will be satin centers definatly.
Dollars going up , wheel price is coming down. I havnt been near my car for a month.:( Its extremely dusty and has no wheels ....sux

No worries Gav, we all have spurts of motivation and then demotivation!! Im hanging to get mine finished too. Once I have the tyres (still not here) ill fit em push it out the workshop and take some pics for you and the boys. Then rego, brakes, drop the rear by an inch - maybe.. :-) then happy happy joy joy :D :D :D.

Man you are going to get a good deal with the dollar!!

USA-69Z

11-11-2009, 10:19 PM

No worries Gav, we all have spurts of motivation and then demotivation!! Im hanging to get mine finished too. Once I have the tyres (still not here) ill fit em push it out the workshop and take some pics for you and the boys. Then rego, brakes, drop the rear by an inch - maybe.. :-) then happy happy joy joy :D :D :D.

Man you are going to get a good deal with the dollar!!

Yes the dollars moving gently upward.... i guess with your new rims im interested to see how they fit under your guards..Have they had any lips trimmed ect? Did Jason sort the backspace ? '5.6sumthing' he does i think?
The 10s & 275 tires are bloody tight , i actually had a bit of rubbing going on on the left side even after a trim up . So i will have the luxury of tweaking the backspace this time round.

USA-69Z

11-11-2009, 10:19 PM

Your 69 is an absolute credit to you Gav.

cheers Marshall !

rodent

12-11-2009, 10:27 PM

.. im ready to buy rims NOW but still undecided on rated x or superspokes:o :o :o................Or the ones below :D

:D

http://www.lexani.com/wheels/firestar_chrm.png
http://www.lexani.com/wheels/dagger_chrm.png
http://www.lexani.com/wheels/pyro_chrm.png
http://img.photobucket.com/albums/v604/rodent4/lt703_chrmblk.png

AUSCAMARO

13-11-2009, 12:32 AM

Yeah, thats the shiz nizzle right there... You wouldlook fully pimp with a set of them Gav!!

**puke**

RAW454

13-11-2009, 11:19 AM

:D Dear Jim,
Please show some respect to Gav's thread and do not fill it up with such obsurtity, however tempting.

3604 3605

(Damn, how they get there? :rolleyes: :p )

69SS

13-11-2009, 11:28 AM

if only they where spinners.. such a shame!!!

USA-69Z

13-11-2009, 01:16 PM

if i could get them in 18s id buyem' :p

Twisted67

13-11-2009, 09:05 PM

if i could get them in 18s id buyem' :p

and the right backspacing?????:p

69SS

13-11-2009, 11:08 PM

and the right backspacing?????:p

with coloured or brushed centres!! :D :p :D :p :)

USA-69Z

14-11-2009, 08:09 AM

Just got a quote for rim freight for $600US ! i think thats way too much ?

what did freight cost you lyndsay?

Gav

69SS

14-11-2009, 01:34 PM

It was 450USD via UPS - not a huge a difference between what you where quoted, I have noticed that shipping quotes will change day to day on some items! Jason organized all the freight for me as I was at work and it was way too much hassle for me to organize. I thought it was pretty reasonable at the time! You may also find the drop in USD is affecting shipping costs from states to oz, just a thought.

Cheers,

Does this mean you have ordered your wheels? My tyres wont be in Perth until next tuesday at the earliest. lucky im not in a rush hey!!

USA-69Z

14-11-2009, 03:14 PM

69SS

14-11-2009, 03:50 PM

Great price mate, with the exchange rate thast heaps cheaper than I paid!!. I dont have Jasons mobile / cell number handy.. Its on my work Mobile which is in Cairo!!

Rushforth

17-11-2009, 03:38 PM

Ah hah! My ears were burning! Thanks for talking up the wheels, guys! My Australian clients are some of my favorites! You guys are all so cool and enthusiastic and I really appreciate the guys who have jumped on board with the wheel line. I need to get down there and attend a show with you guys!

Jason
www.RushforthWheels.com
www.JasonRushforth.com

AUSCAMARO

17-11-2009, 11:37 PM

Yes.. please do.. You're welcome to attend our Get Together later this month!!:D :D If only!!:D :D

Rushforth

18-11-2009, 01:56 AM

Yes.. please do.. You're welcome to attend our Get Together later this month!!:D :D If only!!:D :D

Oh man! That's a little too soon to plan for but you guys are definitely in my 2 year plan!

Twisted67

18-11-2009, 02:04 AM

Oh man! That's a little too soon to plan for but you guys are definitely in my 2 year plan!

You'll love it down here Jason.I was lucky enough to meet Troy Trepanier @ SEMA and he loved it when he came down a couple of years ago and was booked to come down again for another show soon!!!

69SS

18-11-2009, 12:01 PM

Jason, just remember how big a country it is and try and make sure you come over to West Oz where all the cool people hang out !! :D :p :p :D .

Good to see you join USM.

Cheers,

Lyndsay

18htan

19-11-2009, 01:04 PM

Jason, just remember how big a country it is and try and make sure you come over to West Oz where all the cool people hang out !! :D :p :p :D .

Good to see you join USM.

Cheers,

Lyndsay

West where...?

:p

S[_]SPECT

19-11-2009, 01:39 PM

Yeah, we dont get many vistors..
http://wiki.answers.com/Q/What_is_the_most_isolated_city_in_the_world

They tend to stay here..:)

69SS

19-11-2009, 08:07 PM

West where...?

:p

orrr you guys!!!!

USA-69Z

06-01-2010, 05:52 PM

Ok all, finally the new rims arrived... Very tight fit on the left....maybe sum more massaging to get it right... but happy with the finish

heres a cupla b4 and after shotz.....

http://i221.photobucket.com/albums/dd202/dragstripper/kurri09015.jpg

P.S i will be selling these shortly as they dont fit under the guards anymore:mad:

http://i221.photobucket.com/albums/dd202/dragstripper/100_0573-1.jpg

http://i221.photobucket.com/albums/dd202/dragstripper/MYCAMARO24THOCT09014.jpg

http://i221.photobucket.com/albums/dd202/dragstripper/HOTRODANDCAMARORUSHFORTH009.jpg

USA-69Z

06-01-2010, 05:52 PM

http://i221.photobucket.com/albums/dd202/dragstripper/HOTRODANDCAMARORUSHFORTH014.jpg

WILD68

06-01-2010, 06:09 PM

Gav those Intros were nice but the Rushforths look great, very nice now, finally.
Intros were Tacky... Ruthforths are Classy.

RAW454

06-01-2010, 06:10 PM

BANG!!!! We have a winner!! Wow - That satin & trick design suits SO much better than the polished slab of KWCs. Must be wrapped :cool:

Now give that car a bloody good wash/polish & watch how they set it off. Congrats!! :)

cluxford

06-01-2010, 06:58 PM

Gav, they look sweet, they even tuck up nicely, you gotta be stoked with those, arrived at 1pm, on the car by 6pm...wow

USA-69Z

06-01-2010, 07:08 PM

looks like ive gotta little work to do now...seems the rear springs which i just had reset have settled? or something and now left side is sitting about 2mm from that hump where the inner tub meets the lip. Not sure what to do?
I couldnt drive it like this .So i will have to take the springs back for another reset or some kind of surgery under there without hurting the paint which is unlikely.. pretty bummed:( :( :(

69SS

06-01-2010, 07:15 PM

Look awesome mate, and you beat me to get pics out in the light of day!!!

Cant you adjust the diff a little to the right. Mine was about 5mm off centre, once I slackenend off the U-bolts and moved it over it was sweet. Although my rear isnt as low as yours and I still need to get the outside lips rolled a little to be sure!!

USA-69Z

06-01-2010, 07:18 PM

I dont think ive got enuf room to slide the diff across lyndsay..Its too tight on the other side. On the limits ..Funny thing is i got tons of room inwards , so the backspace coulda been tweaked for a perfect fit..

Heres a crude drawing of my problem..If anyones got any suggestions id like to hear them

Gav

http://i221.photobucket.com/albums/dd202/dragstripper/001-8.jpg

Twisted67

06-01-2010, 07:31 PM

Gav they look soooo cool mate,absolutley love em!!!
Sorry to hear about your rubbing issues but im sure you'll work it out or someone will have a few ideas.

69SS

06-01-2010, 07:33 PM

How about a modified gaurd roller Gav, with a custom die / roller made up. It may be just enough to push the hump back on its self without distorting the outer gaurd.. Just a thought.

I am sh*t scared about rolling mine!!! Mine also have heaps of room inboard, about 35mm from memory..

cluxford

06-01-2010, 07:36 PM

Gav, discs or drums on the rear ?

blackoutsteve

06-01-2010, 08:43 PM

USA-69Z

06-01-2010, 08:49 PM

chris , i got drums in the rear...

Steve, moser rear , stock width.. backspace adjust is outa tha question...

Man i buggered with this.. could i heat this hump and flatten it? or cut it out and weld a flat section in or or or ???:o

Im thinkin if my rear quarter is out by an inch or so from a prior woofta in it ( signs of) , maybe a new quarter panel or lift the arse up an inch too is a possibility

69SS

06-01-2010, 08:56 PM

You're going to need a reasonable about of clearance too Gav.
Because the leaves are the only thing that locate the axle, and they flex, they'll rub in corners. You need a good 1/2". ..at least!

Otherwise, a Panhard rod or Watts link.. Better and easier to have the BS increased.
Is that possible?

Um.. Do you happen to have a 9" in there that's too wide anyway?

Steve - are you suggesting that Gav should fit a narrower Diff?? Is yours standard width or slightly narrower? I'm thinking that if I have the same issues when lowering I might have to chop the diff by an inch or two.

blackoutsteve

06-01-2010, 09:02 PM

Steve - are you suggesting that Gav should fit a narrower Diff?? Is yours standard width or slightly narrower? I'm thinking that if I have the same issues when lowering I might have to chop the diff by an inch or two.

I just thought on the off-chance that it may have been a 9" and yes, it may be wide buy an inch..
Cutting the tubes, re-welding them and cut & respline the axles may have been easier.
Just a thought but it's not an option.

Gav, are these wheels.. um.. Billet?

USA-69Z

06-01-2010, 09:04 PM

heres a shot of my dash the guy was hand forming for my conversion..Not factory correct like steves , but is very neat now its covered etc

http://i221.photobucket.com/albums/dd202/dragstripper/100_0438-1.jpg

http://i221.photobucket.com/albums/dd202/dragstripper/100_0437-1.jpg

blackoutsteve

06-01-2010, 09:11 PM

Neat.. It that replacing the one in the lower pic? It looks different.
Was the other bad?
Also, is that a GM or repro instrument carrier? Very uncommon to see an un-hacked radio plate.

MrBlonde

06-01-2010, 09:31 PM

Like the new wheels Gav

69SS

06-01-2010, 09:33 PM

Gav, just a thought.. Have you checked to make sure the rears actually are 5.75in BS.. this could be the issue if there is heaps or room on the inside, I didnt check mine !! and now you have got me thinking that there really shouldnt be that much room inboard.

blackoutsteve

06-01-2010, 09:37 PM

Have you checked to make sure the rears actually are 5.75in BS..

What size are these rims?

USA-69Z

06-01-2010, 09:52 PM

Neat.. It that replacing the one in the lower pic? It looks different.
Was the other bad?
Also, is that a GM or repro instrument carrier? Very uncommon to see an un-hacked radio plate.

steve , im not sure what ya mean?
that is the replacement dash top to fit the rhd dash ..As far as i know it was all original when we started. Ill snap a pic tomorrow of those pieces your working on and the finished dash top and guage cluster.

rims are 18 x 10 with 5.75 backspace...was on the box?

cluxford

07-01-2010, 04:20 AM

Gav,

Measure your backspace, I did with the 1 rim I pulled out and will with all 4 just to be sure.

My rim is 1 inch wider than I expected, you may have the same issue.

That is it is a 17 x 12, but If I measure outer lip to outer lip it's 13". Hard for you to do now with tyres fitted. I'll post a pic later today with what I mean

Shortening your diff by an inch sounds like the option to go.

Or you can have someone local cut out the wheel centers and move the backspace (big job and could butcher the wheels in the process).

This is a bummer dude.

I have to say the most painful, confusing and just plan hard part of my car is backspacing, with so many variables it's so bloody hard to get right. My first attempt was fine till the diff length resulted in a 2" gap from wheel to fender edge, not what I wanted, so now new rims...so I've been done this costly wrong backspacing / diff width path and feel for ya if it's not a simple fix

chevguy

07-01-2010, 07:43 AM

I think the only way to do it properly bud is to get the b/s changed as per what the other guys have said, at the end of the day it`s a pain but it will be the cheapest/best way to fix your problem. Use a really good machinist and they should come up fine. Unfortunately I have the same problem as you but reversed, I only have about 5mm of clearance on my springs(won`t rub but tyres sit to far in) and I have resigned myself that it`s the only way to go. I have been quoted $150-00 a rim if that helps your decision.

blackoutsteve

07-01-2010, 07:52 AM

My rim is 1 inch wider than I expected, you may have the same issue.

Rim width is measure from the INSIDE faces of the bead seat. Rim width is not the overall rim width, but the width of the tire's bead seat.
If you measure the outside lip edges, you're rim will be approx 1" wider than it actually is.

Conversly, backspace is measured from the OUTSIDE LIP of the rim.

http://i198.photobucket.com/albums/aa48/afmomto2/WheelBackspacing.jpg

USA-69Z

07-01-2010, 08:26 AM

I have just sent an email to 'Neale Wheels' in sydney for a quote.... Ill post my reply

http://nealewheels.com.au/

Gav

blackoutsteve

07-01-2010, 08:57 AM

What are you going to change your backspacing to?
I would have thought that a 5.75" BS on a 10" rim would be a tad shallow.
8" rims are generally happy with a 4.25-4.5" BS and that brings the outer lip reasonably close to the inner wheel well with some breathing space.
Add 2" to the wheel width and that whole 2" should go to the inside I would expect. 6.0-6.5" BS..
Is there enough room back there to do this before you modify these wheels?

cluxford

07-01-2010, 09:01 AM

Steve, yeah 12" on the inside lip to lip on mine.

I know they measure inside lips, I just wasn't expecting a whole other inch on the outside lip to lip

Gav, don't tell me you are going for a 3rd set of wheels ?

Stay with the Rushforth's just get the diff shortened

blackoutsteve

07-01-2010, 09:09 AM

Stay with the Rushforth's just get the diff shortened

With a correct width Moser? :o
This sure is choosing between your kids but, I'd do the wheels. Any visable mods left on the wheel will go further inboard. In other words, you won't see them.
I'd also expect a BS change to be much easier, cheaper and faster too.

USA-69Z

07-01-2010, 09:15 AM

With a correct width Moser? :o
This sure is choosing between your kids but, I'd do the wheels. Any visable mods left on the wheel will go further inboard. In other words, you won't see them.
I'd also expect a BS change to be much easier, cheaper and faster too.

exactly steve , thats my first choice for sure... i have a good inch on the inside left to play with...so im thinkn' halfa inch should do it.. and from what i read this mob in sydney looks like they are capable.. so 6.25 ? is that right...half inch on top of 5.75? i wasnt to flash with maths at school:o

blackoutsteve

07-01-2010, 09:25 AM

I'd take the wheels off. Jack up the rear LEVEL across the width of the car and drop a plumb bob down and mark in on a concrete floor.

The narrowest part of the outer lip and the narrowest of the inner lip.
Then down from the flange where your wheel bolts on. and measure these marks on the floor.
I'd aim for smack in the middle or a minimum of 1/2" from any part of the car.

5.75 + 0.5= 6.25 yes, but don't guess that is what you need Gav. ;)

454 NUTTR

07-01-2010, 09:31 AM

can you take any thing off the back of the wheel ?like machin 10 or so mm's off hub of the wheel on the back just with new commodore wheel's and putting them on old commodore's u have to take a bit off the back work's fine ? just sum wheels have a bit of meat on the back to work with

J.J.

07-01-2010, 09:34 AM

a bit late, but the wheels look crazy! good work, bummer about the rubbing issues

qik66

07-01-2010, 09:39 AM

USA-69Z

07-01-2010, 09:39 AM

Not sure on that scott ,i think where the studs come thru would get too thin as there is a deep taper inside. .

I just got a reply from wheel engineers,, they want me to bring them to sydney to have look to see if they can do the job... 1 1/2 hrs drive for a look:(

Ill just have to do it it if measures up that way

USA-69Z

07-01-2010, 09:43 AM

I'd drop Jason a quick email with your problem to ensure there is enough meat in the center of the hub before you machine anything off it. hate to see a center break under load and a wheel come loose. If he gives the OK it would be the way to go.

Funny part about all this ...i spoke to jason about the b/s and he was going to tweak it to his specs for a better fit with the 10s. But i got the standard 5.75 b/s .... Ill have a look at how much meat is there to play with

WILD68

07-01-2010, 02:26 PM

Have you spoken to Jason about it Gav? He may help?

USA-69Z

07-01-2010, 02:32 PM

ok , heres the thing ha ha ha to me :(

i was looking at panel and paint sometime mid year and guess what, its come early ! yay ! the rear left quarter has been repaired previously from a whack in the rear left..On close inspection in the boot and tail you can see its been panel beated. So im now thinkin' if i get a new rear quarter put on i could tweak the inner and lip while its apart.. ( seeing though i cracked the paint over the guard has no bearing on my decision:p :cool: )
so now i am looking for a rear quater ? and a quote for quality work...I already have new guards and boot and tail panel to go on as well. Im worried about the fit of these repro bits , dave clee has the quarters listed for $500 odd bux with NO returns accepted at all.

whats your thoughts on this ripple effect ... and what would you expect to pay to get a quarter replaced?

Lucky Gav:cool:

blackoutsteve

07-01-2010, 05:20 PM

Im worried about the fit of these repro bits , dave clee has the quarters listed for $500 odd bux with NO returns accepted at all.

Gee, I'm not sure I understand why this could be.. (That's a joke. :p)

I bought an OER right rear 1/4 off Clee to replace the early POS Dynacorn that was a mile off fitting.
It fitted fine. No problems. Lucky they got enough negative feedback as to improve on their product.

AUSCAMARO

09-01-2010, 12:55 AM

Your really not having much luck with rims are ya Gav...

They do look good though :)

USA-69Z

09-01-2010, 08:00 AM

Your really not having much luck with rims are ya Gav...

They do look good though :)

Mitch , yeah , im in a dark place with the car at moment :o Pissin' me off big time.. but ill grab the bull by the horns and do what i gotta do..Ive run an ad in the local to employ a fussy panel beater for a cupla weeks to help re -sheet the whole arse end of the car.It always needed doing,, I just wasnt ready financially just yet.. but ill find the cash to do it. I want it in primer by end feb With all new panels in place. so the race is on !

Gav:)

USA-69Z

10-01-2010, 07:56 AM

OK , ive done some research and priced up my parts (so far)
heres the sheetmetal required for the job..I will most likely buy this stuff from Dave at pontiworld..

*OUTER REAR WHEELHOUSE - 139.00
*FULL REAR QUARTER - 475.00
*REAR DECK FILLER (OE ) - 259.46
*TAIL PANEL - 336.90
TOTAL - 1210.36
GST 10%

TOTAL $ 1331.36 PLUS FRIEGHT.

today i start stripping the rear end , any help along the way is welcomed and apreciatted!

Gav:o :o :rolleyes: