muggz
26-10-2008, 01:57 PM
Just cleaning out the shed and found a heap of parts that i wont be making use of.
All parts located in Perth, WA and can be posted anywhere interstate/overseas! :D
1x Chev BB 396 (2 Bolt) motor complete
Needs full rebuild, cast iron block and heads.
Casting number: 3917215
Port Closed
67-68
101cc chambers
It seems to be out of a pick up truck and somehow found its way onto my Camaro! :D
http://farm4.static.flickr.com/3046/2972562139_33b391e91e.jpghttp://farm4.static.flickr.com/3142/2972559835_900b26708c.jpg
http://farm4.static.flickr.com/3001/2973409722_d1d50dd459.jpg
Not sure of its actual value but start at $750 ono
Edelbrock Torker II manifold for SBC
Needs cleanup, Bought originally for my old '76 vette but obviously have no need for it.
http://farm4.static.flickr.com/3285/2973411118_07e4305de3.jpg
$150 ono
2x Flowmaster 40 Street Series mufflers 2.25''
Arguably the best mufflers for the American Muscle cars!
These are brand new and wont get use from me.
http://farm4.static.flickr.com/3196/2972561675_05e996e48c.jpg
http://farm4.static.flickr.com/3158/2972561787_5e97dd95a2.jpg
$350 ono
SBC block header huggers
Brand new! comes with gaskets, collectors.
They measure up to fit 2.25'' pipes
Perfect for those seeking maximum clearance in the engine bay.
http://farm4.static.flickr.com/3066/2972561363_82c0a8a9bb.jpg
http://farm4.static.flickr.com/3154/2973410680_308e7d5b84.jpg
$400 ono
2x Centreline Convo Pro
Measurements are 15'' x 8.5'' with a backspacing of 5''
Regardless these are brand new and was only test fitted. There is no oxidising or white rust. They fit any Chev, Holden.
Again these wont fit the Camaro with the bigger brake package so they have to go.
http://farm4.static.flickr.com/3143/2973410012_1bf29681ca.jpg
$600 ono
1x Camshaft off '76 Corvette L48 SBC
Used camshaft stock as far as i know.
Needs a clean up & is in excellent condition with no irregular wear.
http://farm4.static.flickr.com/3010/2972561211_935fff5d31.jpg
$50 ono
1x Used Powerglide Transmission.
Bought with intentions to use for the Camaro but decided to go with the Manual. There is a bit of casting broken on the RHS housing & doesnt interfere with the mounting to motor. Comes with Torque converter.
http://farm4.static.flickr.com/3041/2972560081_8a935758e9.jpg
$200 ono
1x LHS fender '68 Chev Impala
I found this in the old mans shed which came with my old '68 Impala which i dont own anymore. Its in excellent nick just little crack at base of the fender (shown in pic)
$200 ono
http://farm5.static.flickr.com/4115/4760524956_0795fc4da3_b.jpg
http://farm5.static.flickr.com/4074/4759890489_83f8ec3e21_b.jpg
http://farm5.static.flickr.com/4135/4760525274_05063559e7_b.jpg
Contact Muggz:
PM
Email: espek@iinet.net.au
Mobile: 0412 108 452
All parts located in Perth, WA and can be posted anywhere interstate/overseas! :D
1x Chev BB 396 (2 Bolt) motor complete
Needs full rebuild, cast iron block and heads.
Casting number: 3917215
Port Closed
67-68
101cc chambers
It seems to be out of a pick up truck and somehow found its way onto my Camaro! :D
http://farm4.static.flickr.com/3046/2972562139_33b391e91e.jpghttp://farm4.static.flickr.com/3142/2972559835_900b26708c.jpg
http://farm4.static.flickr.com/3001/2973409722_d1d50dd459.jpg
Not sure of its actual value but start at $750 ono
Edelbrock Torker II manifold for SBC
Needs cleanup, Bought originally for my old '76 vette but obviously have no need for it.
http://farm4.static.flickr.com/3285/2973411118_07e4305de3.jpg
$150 ono
2x Flowmaster 40 Street Series mufflers 2.25''
Arguably the best mufflers for the American Muscle cars!
These are brand new and wont get use from me.
http://farm4.static.flickr.com/3196/2972561675_05e996e48c.jpg
http://farm4.static.flickr.com/3158/2972561787_5e97dd95a2.jpg
$350 ono
SBC block header huggers
Brand new! comes with gaskets, collectors.
They measure up to fit 2.25'' pipes
Perfect for those seeking maximum clearance in the engine bay.
http://farm4.static.flickr.com/3066/2972561363_82c0a8a9bb.jpg
http://farm4.static.flickr.com/3154/2973410680_308e7d5b84.jpg
$400 ono
2x Centreline Convo Pro
Measurements are 15'' x 8.5'' with a backspacing of 5''
Regardless these are brand new and was only test fitted. There is no oxidising or white rust. They fit any Chev, Holden.
Again these wont fit the Camaro with the bigger brake package so they have to go.
http://farm4.static.flickr.com/3143/2973410012_1bf29681ca.jpg
$600 ono
1x Camshaft off '76 Corvette L48 SBC
Used camshaft stock as far as i know.
Needs a clean up & is in excellent condition with no irregular wear.
http://farm4.static.flickr.com/3010/2972561211_935fff5d31.jpg
$50 ono
1x Used Powerglide Transmission.
Bought with intentions to use for the Camaro but decided to go with the Manual. There is a bit of casting broken on the RHS housing & doesnt interfere with the mounting to motor. Comes with Torque converter.
http://farm4.static.flickr.com/3041/2972560081_8a935758e9.jpg
$200 ono
1x LHS fender '68 Chev Impala
I found this in the old mans shed which came with my old '68 Impala which i dont own anymore. Its in excellent nick just little crack at base of the fender (shown in pic)
$200 ono
http://farm5.static.flickr.com/4115/4760524956_0795fc4da3_b.jpg
http://farm5.static.flickr.com/4074/4759890489_83f8ec3e21_b.jpg
http://farm5.static.flickr.com/4135/4760525274_05063559e7_b.jpg
Contact Muggz:
PM
Email: espek@iinet.net.au
Mobile: 0412 108 452