Where to get parts in South East Melbourne?

[OzRiv]

Ok, the time is getting closer to getting the Riviera roadworthied, and with my luck, I'll end up sending it to some guy who will go over it with a microscope, so just to be prepared, where would you guys recommend to go for balljoints, bushes, seals etc.
Being a GM car, it will share a lot of the everyday bits and pieces with the chevy and othe GM cars of the same era.

TIA

[SirGeo]

I'm doing all that myself so I wouldn't have a clue.. but i'm guessing if you just take it to an oldschool mecanic or even pedders if you can afford it :p would be fine...

Take it a mech that can do the roady at the same time.. or atleast let you know what else you need to do to it...

[OzRiv]

I am doing as much as I can myself, so I'm looking for places to get the parts.
Eagle is close, but there must be other places doing US parts too.

[SirGeo]

I got most of mine through Pete at EastCoast Must&Cama.. anything he didn't have pedders could organise....

I went to pedders on warrigul Road (near south road intersection) if that helps.

[rodent]

If you need roadie stuff, there's a couple of joints in Ballaarat that stock most stuff. :D

[OzRiv]

Is that the EastCoast on the cnr of North Rd and East Bentleigh /murrumbeena rd?

[69coupe]

Is that the EastCoast on the cnr of North Rd and East Bentleigh /murrumbeena rd?

Eastcoast Mustang and Camaro Parts
Factory 6/46 Industrial Park drive Lilydale
(03) 9737 6050

[SirGeo]

Eastcoast Mustang and Camaro Parts
Factory 6/46 Industrial Park drive Lilydale
(03) 9737 6050

Thats the one ;)

Is that the EastCoast on the cnr of North Rd and East Bentleigh /murrumbeena rd?

Those guy's are ok if it's a popular model (aussie car etc) or you know exactly what you want, or know what it's from... but they don't don't stock allot of the stuff I need, they have to order it in, or if you're lucky enough they will tell you who to get it from directly...